Е115Ш rod, Measuring rod E-115Ш, Rod E115 W to detect theft of electricity

Is designed to control the current on air power lines of 0.38 kV.

Appointment Е115Ш:
control of current on air power lines of 0.38 kV.
Design features Е115Ш:
– sectional, each section sealed to avoid condensation;
– mechanismantabuse high-impact measuring device;
– Е115Ш does not require a power source;
– the scheme can withstand almost any overload current;
– extremely simple circuit touch the wire;
– rod Е115Ш can "hang" on the wire;
– has illuminated dial indicating device Е115Ш.

3. SAFETY REQUIREMENTS DURING OPERATION c Е115Ш .

3.1. When measuring kit Е115Ш need to act in the following sequence:
- twist links of the insulating rod. Should the links be placed coaxially, do not tilt, do not exert excessive force when tightening the threaded bushing;

- connect the conductors between the links of the rod Е115Ш socket connectors;
- to determine the presence and the strength of the AC smoothly, without jerks to touch the overhead wire;
- remove and record the readings.
3.2. The sensor on the rod Е115Ш must be located in the geometric mid-section of the wire.
3.3. To perform accurate measurements set Е115Ш you must adhere to the following rules:
- install the sensor wire is not closer than 0.3 m from the nearest branch;
- when measuring in-phase (zero ) the wire should choose such a place that the distance between the wires was not less than 0.3 m.

Website: http://contragent.com.ua/produktsiya/meritel-sit/item/izmeritelnaya-shtanga-e115sh

Sales Company Contractor: T. 057-780-96-49, f.057-707-84-38. Ukraine. Kharkov.

e-mail: info@contragent.com.ua