Hydraulic press model П7644
Offer type: salePublished: 01.04.2016
| Price: | 40 000 EUR |
| Company: | ChP Lipskij Oleg Mihajlovich |
| Seller: |  Oleg Mihajlovich |
| Phones: |  +38-050-594-99-70 Show phone +380 96 606 3883 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk |
Press in the overhaul process.
Is not in Ukraine.
For the completion of the refurbishment to be agreed technical momenta.
Is not in Ukraine.
For the completion of the refurbishment to be agreed technical momenta.
Press the vertical construction with the lower pressure
Frame presses are solid steel have high rigidity and compactness. The lower part of the frame is a hydraulic cylinder.
When the working area of the presses is closed by protective devices such as shields, with the driven of hydraulic cylinders
The press is equipped with hardened die plates. Rolling guides used in
presses, provide the ability to control the required preload or clearance.
Presses are equipped with control devices to limit the extrusion process at a given depth or for a given pressure in the hydraulic system. Applied devices to monitor the depth of the extrusion, with a scale division of 0.01 mm
The scale of the instrument is calibrated to 50 mm, however, the devices of presses can be configured for metering and greater depth of the extrusion by removing it from the rod unit of the corresponding section of the micrometer caliper. Separately on the Foundation established Cabinet, console and hydroelectric
The hydraulic press circuit in combination with an electric press provides the work in the modes "manual" and "commissioning" and "semi-automatic". When you work with one operator rear shield is in the up position (closed), when working with two operators lift the rear shield by pressing the button after each cycle.
In semi-automatic mode, the operation of the press occurs in the following sequence:
the rise of the front Board;
rapid traverse of slide;
slow supply;
stroke;
stop the stroke when the desired depth of the extrusion or a predetermined pressure;
lowering of the RAM to its original position;
lowering the shields (shield);
Semi-automatic start cycle is only possible when the slide is in the lower position.
If you are working under pressure is the opening of the shields are automatically depressurized
Controls the pressure placed on the remote. There are also signalling lamps, from mecause movement and final position of the press machinery
The operator while at the control, has the ability to monitor devices, as well as the process of extrusion by means of a mirror through the viewing window located in the area, safe for broken tool when you break the Presses are equipped with hydraulic Units model ГА0440А appropriate modification
Hydraulic unit made in the form of a tank, installed pump unit with control equipment, panel filters and the block of high pressure. All equipment is closed by a casing accommodating the necessary manholes for servicing
The unit is designed to operate on hydraulic oil brand VNII NP-403 (GOST 16728-71) with a kinematic viscosity at 50° C in the range of 25-35 Centistokes or brand of Turbine T"-22 (GOST 9972-74) with a kinematic viscosity at 50° C in the range 20-23 FTAs and free from particles greater than 0.04 mm.
Fig. 1
Press supplied with a set of spare parts ensuring maintenance during the warranty period.
Warranty service of the presses 18 months.
Life presses before the first overhaul 28 000 h
The press is shipped partially disassembled in two boxes maximum weight of box — 26,6 t
Dannatamente MAIN press force, тс2500Номинальное the pressure of working fluid, kgf/см2500Ход slide, мм500Скорость slide, mm/s working регулируемая0,005-0,4 accelerated подвода6,7Размер in light between the uprights, height мм900Открытая press, мм710Размеры lower die plate, мм840Х1150Диаметр upper die plate, мм545Габаритные dimensions of press, mm from left направо4650спереди — назад1675высота3240Масса, kg пресса23 500установки27 000
