Cooling lubricants from the company "Techno-M"

In the operation of the machine tool inevitably arise in the process of friction observed between the tool and directly by the industrial unit. In particular, the process is specific to the lathe or milling machine, in a moment of strong heating of the cutters, with multiple landings.

Under intense friction may be severe, premature wear on both the tool and the production machine. In addition, can significantly deform the workpiece. Properties of metals change significantly when heated. To reduce friction and also eliminate the possibility of the occurrence of any of the above problems, it is necessary to apply the cutting fluid, which is better known under the acronym of the coolant. You can buy it in Russia is possible in the company "Techno-M". The full range is present on its official website https://www.techno-m.net/.

There are several varieties of cutting fluids, the separation of which is carried out most often according to the following criteria:

The layout option. Glass is a finished product with a sufficiently long period of storage. This type of production, characterized by the preparation immediately before the implementation of the operational process;

The lubricating fluids may be sub-divided depending on specific purpose, as well as certain conditions of the environment in which you will use coolant. There is a tremendous amount of fluids of this kind which can be used in a completely different working environment;

In addition, cooling lubricants are divided according to components. The most common application of liquids, the manufacturing process which is based on the use of the oil components, various oils, plant fats;

Physical-mechanical parameters. To them, in most cases, include viscosity and acid number. In addition, it may be considered the flashpoint.