Polyester resin for General purpose.

Altek polyester resin for General purpose two-component material, which is resistant to moisture and frost and has a high hardness. Price: from 5 kg-70 UAH/1 kg. From 50 kg to 65 UAH/1 kg. From 100 kg-60 UAH/1 kg. The kit includes a hardener. Production - Finland. Used for the production of: bath; products for car tuning (bumpers, fenders, Denise); boats, boats, yacht, decorative elements, construction forms, Souvenirs, etc. Resin Altek series is a range of ortho-, ISO-, and terephthalic polyester resins are General purpose, used for processes of vacuum forming, RTM, vacuum infusion and hand lamination and spraying. Manual mixing of the components: 1 kilo PSG - 20 grams of hardener. Life time after mixing components A (PSG) and b (hardener) is 90-120 minutes. Mix thoroughly by mechanical means 2-3 min at 200-300 rpm at room temperature to 25°C - 30°C poured into the form. Widely used for making: wall panels and partitions, pavilions, awnings, streetlights, roofs of public and industrial buildings, window sills, canopies, cornices, stair railings, gutters, monolithic toilets, showers, ventilation ducts. Also for the hulls of various ships, motor ships, yachts, boats, Motorboats, catamarans, as well as their other items: portholes, propellers, ship furniture are made on the basis of polyester resins. Polyester resins as coatings are also often applied to protect the sheathing of wooden ships, giving it resistance to rot and borers. Typical mechanical properties of casting: Tensile strength MPa - 79 Modulus of strength at break GPa - 4.1 Elongation % - 2.5 The heat distortion temperature °C - 74 The viscosity of the GPa - 1200 The styrene content % - 35 Peak ectothermy ºC 145