Sell drive UMP
| Price: | negotiated |
| Company: | OOO |
| Seller: |  Vladimir Ivanovich |
| Phones: |  +380676214590 Show phone |
| Address: | Ukraine |
Drive type UMP-II and UNS - II is designed for remote and manual operation sectional disconnectors contact network of electrified sections Railways AC and DC, as well as disconnectors, designed for connection of supplied transformer substations to system DPR (two-wire and rail) 27.5 and to high-voltage lines 10 kV and 35 kV, namely:
UMP – II – for switches types RS, RKS-3.3 V/4000, FSW-3.3 V/3000, RNO(Z)-35, RS-3.3 V/3000 and RNAI(Z)-27,5/1000, RNG-27,5/1600, RD-35/1000.
UMPS – II – disconnectors SPST RND(S) – 35/1000; RNG(Z) – 27,5/1600, RKS(Z)-3,3/3000.
UMPS – II structurally designed the same way as the drive of UMP – II.
In addition the primary output shaft is designed to be operated primarily with a knife of the disconnector, the boss of the housing, the shaft intended for operating a grounding knife switch.
Both shafts special washers interlocked in such a way that ensures that remote control actuator when the position of the control shaft earthing knife.
The operation of the control shaft earthing knife is the same handle used during manual operation of the actuatorSPECIFICATIONS
The name of the parameter
UMP – II
As 001.00.000
UMPS – II
As 006.00.000
1
Rated motor power, W
250
2
The voltage, V
220
3
Type of current
Single-phase variable frequency
50 Hz or permanent
4
The actuator
Remote and manual
5
The output shaft rotation angle, degrees
90±5
6
Run time drive one complete operation (In or About), with no more than
2,5
7
Overall dimensions (length, width, height), mm, not more
530х400х390
530х400х445
8
Weight, kg, not more
60
64
9
The average service life, years
20
