oil press screw forpress MPF-2000
Offer type: salePublished: 04.03.2020
| Price: | 650 000 UAH |
| Company: | TM MASLOTEH |
| Seller: |  Ivanov Andrej |
| Phones: |  0631343501 Show phone |
| Address: | Ukraine, Kharkivs'ka Oblast', Kharkiv |
TM MACROTECH offers from a warehouse in Kharkov: Press screw forpress model series MPF is designed for pre-pressing the oil from the pulp or raw oilseeds (past vegetalbe processing) in the circuits of single and double pressing, by cold or hot pressing.
Oilseeds, to maintain the technological parameters of screw press prior to compression needs to be cleaned from litter.
The temperature of the substrate is not less than 50 ° C and humidity not more than 6 - 7%.
The design of the screw press consists of frame, reducer feeder, screw shaft, curb cylinder, cone mechanism and the tray that collects pressed oil.
Oil-based raw material that has passed preliminary processing, is fed into the hopper is captured by the screw and supplied to curb the drum consisting of separate curb cameras. By rotating the screw shaft moves the raw material through the camera of the curb of the drum. Due to reduction in free volume of the screw shaft turns in the direction of the output materials, and also reduce the diameter of the chambers and gaps of the curb of the drum, there is an increase in the pressure of compressed raw materials. Squeeze the oil passes into the gaps between seerumi and collected in the pan. The output of the pressed raw materials (oil cake) from the press cone adjustable pressure regulator.
Performance T. day dimensions Weight Engine
Mill MPF-2000 60 t 1400*4700*1800 5000 30-37 kW
