Bizator  /  Adverts  /  equipment and materials  /  trading and food industry  /  food industry equipment

The boiler for the incineration of waste oil crops

Offer type: salePublished: 06.03.2020
Price:negotiated
Company:TM MASLOTEH
Seller:Ivanov Andrej
Phones:
Show phone
Write a message
Address:Ukraine, Kharkivs'ka Oblast', Kharkiv
TM MACROTECH offers from a warehouse in Kharkov: the Boiler for the incineration of waste oil crops (HRSG) is a combustion chamber for utilization waste products that are produced when processing oil-bearing raw materials (peelings, husks, oil litter, briquetted husk). In the processing of waste of this production is allocated a sufficient amount of thermal energy that goes to heating the coolant that is used for space heating, process equipment, etc heat transfer Fluids used for heating, do not contain ozone-depleting substances. The main applications of combustion boiler - collective and private farms producing vegetable oil.

Fuel for the boiler combustion are wastes, which are formed during the processing of the raw materials, namely husks, piketirovanijah husk, husk, oilseeds COP. In the absence of adequate quantities of such waste may use waste wood processing enterprises, sawdust, shavings or wood directly.

The combustion boiler(HRSG) consists of the hopper, the grate, the camera thermal decomposition of the fuel chamber for afterburning of the generator gas, multi-pass heat exchanger for the coolant system purge air through the boiler. At the bottom of the combustion boiler is located in the base, which is a welded metal frame on which are installed on top of the remaining parts of the boiler. The afterburner chamber is isolated from the outside heat insulator.

The principle of operation of the combustion boiler:
Fuel (waste, husks, hulls, oil litter, wood waste) is poured into the receiving hopper of the boiler. A special dispenser fuel is constantly supplied to the boiler, where the gasification (pyrolysis) and the almost complete transformation of fuel into combustible gas. A torch of hot gas is directed into the afterburning chamber, where due to the heat of combustion of fuel (generator) gas heats the coolant.Coolant circulates through a multi-pass heat exchanger, which is located directly in the camera afterburners.

 

Feature

The norm

Nominal heat power, kW

100

Rated fuel consumption, kg/h

25

Maximum coolant temperature, °C

240

Hopper capacity, m3

0,5

Maximum fuel consumption, m3/h

0,3

Dimensions, mm
Diameter
Height


900
2100

Specific emissions of nitrogen oxides, mg/m3, not more

280

Specific carbon emissions, mg/m3, not more

2500

Ozone-depleting substances

the lack of

The state of the grain layer

solid