1В62Г lathe, screw-cutting, 1989.

Screw-cutting lathe 1В62Г applies to the universal technological cutting equipment used primarily for repairs or other metal-processing enterprises.Used for turning outer and inner surfaces of parts like bodies of rotation of a variety of axial profiles. Maximum diameter of workpiece, mm over bed: 445; over cross slide: 220; over spindle: 620. The maximum length of the workpiece, mm:over cross slide: 1000; over excavation of the base: 290; above the notch of the frame when mounted on the faceplate: 240. Maximum turning length, mm: 900. The end of a spindle flange according to GOST 12593-72: 6K. Centre according to GOST 13214-79: - in the spindle: 7032-0043(M6); - in tailstock quill: 7032-0039(M5). The diameter of the cylindrical hole in the spindle, mm: 54. The height of the cutter installed in the tool holder, mm 25. Number of speeds live spindle, at least: 24. Number of speeds reverse rotation of the spindle, not less than 12. The spindle rotation frequency, Rev/min: 10-1400. The number of steps of feeds longitudinal/transverse, not less than 50/50. Range of feed mm/R:longitudinal 0,018-22,4; cross 0,009-11,2. The number of cut threads, at least: - metric: 36; - module: 36; inch: 45; - Pitjeva: 45. The speed of carriage, m/min: - longitudinal: 4,0; - cross: 2,0. The maximum length of travel, mm: - carriage: 900; - lower caliper: 280; upper caliper: 130; tailstock: 150; tailstock (transverse offset): ±15. The maximum angle of rotation of the upper caliper, deg: ±90. The price of one scale division movement, mm: - carriage: 1,00; - lower turret: 0,05; - the upper caliper: 0,05; - quill: 5,00. The price of one division of the scale turning the top of the caliper, hail: 1.00 each. Motor-main motor kW: 7.5. Machine dimensions 1В62Г, mm: - length: 2800; - width: 1190; height: 1450. Weight of the machine 1В62Г, kg: 2450. Detailed photos on request. Good condition. Complete. Location: Kiev. More information at: http://marketstan.com http://marketstan.all.biz http://marketstan.com.ua