Absorption (gas) cooler waeco/dometic combicool RC 2200 EGP, l (12/24/220 W+Gas) in Kyiv, Donetsk, Odesa, Kherson, Mykolayiv,: Size

Description:

Absorption refrigerator aluminum running on szygenda gas (10.5 g/hour max, 6-liter gas cylinder lasts for a week of continuous operation), AC 230v or from the cigarette lighter socket car battery 12v. Has temperature control.

To connect the refrigerator to a gas cylinder must be purchased separately reducer and gas cylinder.

This practical refrigerator has a capacity of cooling to 33°C below the ambient temperature, which makes it the absolute leader among absorption refrigerators.

The refrigerator is equipped with a tray of ice. Does not restrict your freedom of movement. Ideal for fishermen and tourists in the car and in the country.

Features:

• Temperature range: cooling 33C from the ambient temperature, but not below-5C
• Power: 12/230 W or Gas
• Volume: 41 l
• Average consumption: wt or Gas 10,5 gr/hour
• The consumption of gas per day, g: 187 to 252 g
• Dimensions L - W - h: mm HH
• Weight: 14 kg
• Model: Waeco COMBICOOL RC 2200 EGP

Features:

• Piezosurgery
• Temperature adjustment
• 3-phase adjustment of the flame in the gas mode
• Durable aluminum housing
• Absolutely silent operation
• Built-in handles for carrying

Manufacturer: Waeco (Germany)
Warranty: 24 month (authorized service center)

Equipment: two power cords - 12W and 220W. Cardboard box. Warranty card.

Operating tips:

RC 2200 EGP for normal operation, you want to install on a horizontal and level surface. It also should not be exposed directly to the heat radiation: sunlight, heating equipment, etc.

When running on gas, the cooler it is recommended to place in a well-ventilated place, protected from rain and water splashes. It is necessary to ensure maximum airflow around the rear side of the appliance, to ensure the dissipation of generated heat. The hottest spot is the area of a gas burner. This place must clean from any debris and combustible materials. The heat generated during operation of the refrigerator, is excreted into the surrounding air through the condenser, located in the upper part of the rear wall of the refrigerator. The better ventilated condenser, the more effective working of the refrigerator.

When running from the mains, it can be used indoors, but to protect it from moisture. If you include an empty fridge before you travel, check the thermostat at MAX, and then after 5 hours, set it on the average scale value of the thermostat (it is recommended to include in the electricity supply 220V 24 hours).

When a refrigerator is on the surface of the evaporator can be formed frost, and at frequent opening of the refrigerator or add new products, it can melt and turn into water. Therefore, it is recommended from time to time, wipe the water with a sponge.

A fixed gear (not supplied), as the refrigerator is designed for a certain gas pressure (30 mbar). Gas hose to the reducer recommended to buy 8mm.

When you attach a pressure regulator to a gas cylinder, the cylinder valve must be closed. Screw the regulator to the cylinder (the regulator comes with a plastic wrench), attach both ends of the hose to the nipple and secured the hose (you can pump out air from the gas hose) with two clamps (not supplied).

Once you have opened the valve of the gas tank, press down on the gas supply regulator, install it, hold on a large icon of flame, and hold in this position for approximately 10 seconds. Simultaneously press pezopodzhiga several times in a row. If the gas burner does not light, it is necessary to repeat the procedure.

The ignition burner flame can be checked through the peephole, located at the bottom left on the back of the fridge. After the occurrence of the flame, hold the regulator to the gas down another 20 seconds.

The hose must not be stretched, rolled into a bundle and must not come into contact with hot surfaces.

The principle of operation of the gas autoholowanie:

Gas refrigerator does not contain chlorofluorocarbons. As the refrigerant in the cooling system uses ammonia. And as filler insulation is cyclopentane.

Gas is used in gas absorption refrigerator exclusively for heating water-ammonia mixture refrigeration unit that circulates inside the refrigerator and produces heat in the evaporator of the refrigerator from the cooling chamber to the outside in the environment.

Absorption refrigerators got its name on what is happening in them the process of absorption - absorption of liquid or solid absorbent (typically, this water vapor refrigerant (ammonia) produced in the evaporator. Simply put, a pair of ammonia absorbed by water with formation of a water-ammonia solution.

Refrigeration unit is located at the rear of the absorption refrigerator and the evaporator inside the refrigerating chamber.

In the gas refrigerator burning gas heats the water-ammonia solution in the absorber, in which by heating of the ammonia water soluble and moves up the tube D.