"EL ES GROUP - lighting poles type SP, stylish support type S, simple support type SP.

Simple support type SP Intended use: for illumination of residential areas, local streets, squares, pedestrian areas, modern shopping areas, etc. Technical data: height: 2,88 m to 6m end of support: type "A" - designed for mounting the end cap WT, systems consoles P; type "B" is designed for use fixtures with a mounting end ø60: OP-400 OP-450; type "D" - is intended for use fixtures with a mounting end ø76: OPC-1 ø76; type "E" is for mounting the end cap WTM. the base: - ø225 - anchoring device Z-20 - ø300 - anchoring device Z-40, the anchor device Z-41, the anchor device Z-42; manufacturer: without a niche or niche - additional designation with the letter "W"; color - white or black; view black material: coating of plastic material in the standard version; coating of plastic material with higher thermal stability for the version indicated in the code letter "F". Stylish bearing type S Intended use: for illumination of streets in the old part of the city, historical sites, parks, etc. Technical data: height: 1,40 m to 5.28 m end of support: type "A" - designed for the installation of consoles; type "B" is designed for use fixtures with a mounting end ø60: OS-1, OP-400 OP-450; type "D" - is intended for use fixtures with a mounting end ø76: OPC-1 ø76; the base: - ø225 - anchoring device Z-20 - ø300 - anchoring device Z-40 manufacturer: without a niche or niche - additional designation with the letter "W"; color - black; material type: coating of plastic material in the standard version; coating of plastic material with higher thermal stability for the version indicated in the code letter "F". Lighting poles type SP A characteristic feature supports type SP is a modern and direct form elements of synthetic material. In the design of the bearings in this series are: three different bases, five different external elements, - steel construction sootvetstvuushuu each type. On the basis of the above-mentioned elements are five main types of supports SP using connection basis from two to five elements of synthetic material. The performance of niches is possible only in the case when the design uses the element 1. The end supports of the type SP allow installation of single lamps and aluminum end cap type WT and WTM. Support depending on the height and diameter of the base adapted for mounting on the Foundation type B or with the use of anchoring devices of type Z: - In-20, Z-20 - Ø225 mm, - B-30, Z-30 or B-40, Z-40 - Ø300 mm, - B-42, Z-42 - 400 mm x 400 mm The main colors are: black, gray, white. When you order a minimum of 100 pieces of support available in other colors For detailed information, please go to our website: www.ls-group.prom.ua