Vailant boiler+pipe turboTEC plus VUW INT H 242-5

Wall mounted gas Combi boiler Vaillant turboTEC plus VUW INT 242-5H with built-in hot water and forced the tap of products of combustion into the chimney. The boiler is used for otoplenie hot water preparation in combination with the capacitive water heater. For boiler draught is not necessary: the products of combustion are removed forcibly by means of the fan. The boiler is equipped with a large backlit display, which displays information about the operational status of the boiler and provides maximum ease of operation thanks to intuitive user interface Features Vaillant turboTEC plus VUW INT 242-5H The power of the apparatus is regulated by modulating burner Temperature control of hot water Forced removal of combustion products in the flue Automatic switching mode hot water at its consumption of 1.5 liters per minute and the power control apparatus according to the flow rate and the temperature of the heated water Heating and built-in hot water For the reconstructed and constructed houses and apartments Can be installed in a residential zone Minimum required side clearance is 5 mm, all nodes accessible from the front Characteristics Vaillant turboTEC plus VUW INT 242-5H nominal heat load 26.7 kW The range of useful thermal capacity of 8.1-20,0 kW Nominal pressure natural gas 13-20 bar The range of water temperature in the supply line 75 to 85 º C The capacity of the surge tank 6/10 l Admissible pressure, 3 bar The flow of hot water at Δ T = 30 To 11.4 l/min Weight 36 kg Article 0010003974 Built-flow plate heat exchanger for water heating, counteracts the formation of scale Built-in circulation pump with automatic switch-speed, closed expansion tank, automatic bleeder, an automatic bypass valve, safety valve, priority relief valve Intelligent control pressure in the heating system Primary exchanger made of copper coated SUPRAL with an average efficiency>=91% Built-flow plate heat exchanger for water heating , counteracts the formation of scale The burner from chromium-Nickel steel permanent protection from freezing Protection against jamming of the pump and 3 way valve at their idle for more than 24 hours The ability to configure a partial power mode upline Electronic ignition and control of all functions Monitoring and Troubleshooting via system diagnostics with LCD backlit display and big buttons Attachment kit in scope of supply Built-in switching module interface standard e-bus