double-row trailed harvester for harvesting corn
Offer type: salePublished: 28.02.2015
| Price: | 23 500 $ |
| Company: | AGROMA Ekspert |
| Seller: |  Denis Stasyuk |
| Phones: |  0950778778 Show phone |
| Address: | Ukraine, Chernivets'ka Oblast', Chernivtsi |
BERKO-025-ROM pricemay harvester for harvesting corn, required tractor power =30 kW; capacity =3,8 cubic meters; height during unloading =2750 mm; distance between wheels =2,1 - 2,8 m; efficiency =0.6 to 0.9 ha/h; the length of the harvester =5700 mm; the width of the harvester =2940 mm; the height of the harvester =2850 mm; weight combine =2120 kg; BERKO-025 - a new model of harvester corn. It
superior double-row trailed harvester model, Serbia, the efficiency of 0.6 - 0.9 ha/h, the length of the harvester 5700 mm, the width of the harvester 2940 mm, the height of the harvester 2850 mm, weight of the harvester 2120 kg; the advantages of the new models combine compared to other
harvesters: own weight less than 20-40 %; the center of gravity is distributed so that our two-row harvester is not
overloads the traction of the tractor; our harvester requires less power tractor about
25-30%; for two-row harvester needs a tractor with a capacity of up to 40 HP
forces; fuel consumption reduced by 3-4 liters per hectare; the capacity of the hopper is 3.8 m3, which is 0,5-0,8 m3 more than
other; there is a possibility to adjust the distance between the wheels, both wheels can be already assembled ranks or can
to be placed so that will go between the rows, the possibility of the other
harvesters none; build quality and purification of corn cobs better
15-20%; the ears should be clean and dry and in wet conditions; performance by 20-30% larger than the other; the performance of the two-row harvester is 5 to 7 acres per day; the principle assemblies combine simplified compared to
other, it has fewer parts. It's easier to make service a harvester when
a much smaller number of consumable parts; built-in cutting with a horizontally operating knives
provides superior quality cut weight and requires less power
tractor; an important difference is that the harvester can be supplied
with drive, which can change the direction of momentum that allows
the user to clear the harvester without leaving the tractor, therefore in case
clogging is the possibility of purification of each section of the harvester in the absence of
the possibility of an accident or damage to the operator when such operation; This possibility has only "BERKO-025 model; new structural solutions in the new model BERKO-025: a new type of harvester bearing hopper Assembly, dismantling
can significantly reduce the transport width and height of the harvester; a hopper Assembly ( mounted with screws)
resulting in a significantly reduced amount of necessary for transportation; the Elevator is also built in, its descent in the horizontal
the position of facilitated transport, and at the same time, the Elevator does not need
will be removed from the harvester, it allows the download of combine harvesters in two levels; the upper and lower chassis are designed so that when
the transport container can be folded on each other, and this
additionally reduces the overall width of the harvester during transportation; application: no
one of these functions does not imply the dismantling of cleaning parts
harvester;
