Metal mesh belt conveyor and conveyors

Firm Ammeraal Beltech Impex Ukraine set the legitimacy of t mesh conveyors metal mesh high quality production are Twentebelt BV (Netherlands) Material conveyor mesh is determined by You and first of all , depends from the nature of the cargo and Your needs. Mesh conveyors are widely used in almost all industries. Their apply: in bread machines; in the furnace of the tunnel type; in the washer installations; for glazing, cooling, sprinkling, watering bakery and confectionery products; for sifting, washing, sorting nuts, fruits, vegetables; manufacture of pharmaceutical products; in the process of freezing, drying, roasting, smoked; in the production of automotive spare parts and electronics; the production of glass and ceramics. Mesh conveyors, collected metal mesh Twentebelt BV have a number of advantages compared with other conveyors produced mi now many enterprises and they have the exact course that does not require service; small envelopes radii, possible due to the flexible the design of the grid; free permeability of heat, cold, air or liquid agents, due to the open grid structure; easy maintenance, grid well cleaned and washed; longevity of service life; wide temperature range ( -100 ° C to + 1 20 0 º C) or processes that use aggressive chemical elements. Here You can order the following conveyor mesh for purchase: m metallicheskie conveyor spiral grid Eyelink (I-link). Each grid developed and manufactured on the basis of individual orders, characteristics and modes of operation. Metal mesh Eyelink have a flat, stable the surface of reliable material. They are well suited for heavy loads and unstable or fragile products that require good support. The straight stroke of the grid is provided drive sprocket specially produced for these nets. Metal grid Eyelink have good flexibility and are easy to clean. This type of grids Тwentebelt has a long service life. The company produces Twentebelt many types of nets Eyelink. At Your request, the grid can be performed with different steps (from 15.9% to 76.2 mm), structure, types and edges additional devices. The structure of nets: loop to loop - (type DO); modular structure with one or more reinforcing rods (up to 8pcs.) - (type DP(L) and DL); pressed loops to reduce the degree of openness of the grid - (type DP); "Combinox" hybrid looped mesh with plastic modules. The types of edges grid: sealed edge (LK); drive chains on edges (KH), is driven jagged stars; the edge with the side rail (GP) for a perfectly straight the operation of the grid; the edge with a plastic block (KB). Dimensions: pitch (from 15.9 to 76.2 mm) wire diameter (1.6 to 3.2 mm); the Step of weaving (measured from center to center wire: 2.8 to 50 mm); Number of reinforcements (from 0 to 8). Available in various materials for the manufacture of nets, including AISI 304 (stainless steel). Enrobing grids have a greater degree of openness and very well suited for glazing, coating and other processes in which the product, if possible, should have the least contact with the grid. This type mesh is great for small products, since the minimum radius spread provides a good transfer of the product. In addition, Twentebelt supplies ready rotary conveyors with change enrobing grids rotation angle 90 deg. Just turning enrobing grid can be supplied separately. Designs: there are a variety of options steps, wire diameter, length and width for this type of meshes. The edges of the grid: edge single-bend S (type GR-SK); edge with a double bend Z (type GR-ZK). Dimensions: pitch (from 3.8 to 28 mm) wire diameter (from 0.9 to 2.8 mm); length fields (25 to 150 mm). Available in various materials for manufacturing enrobing mesh, including stainless steel AISI 302, AISI 316, springy steel, music wire. Bottom grid - "the mother of all metal nets that has virtually an infinite number of production versions, from super powerful (for transport of heavy and/or hot products in wide) to very dense weave for small unsorted products or products that require sustained support. The grid can envelop the shaft with a very small diameter for a better transition to the next stage of the process. Bottom grid suitable for transportation products in the glass industry and as decorative elements in architecture, and for any other industry. Bottom grid can be divided into three main groups: Bessmertnaya; with curved rods; straight rods. Standard forms: bottom grid with curved edges with one side (type SP); corrugated bottom grid with alternate left and right weave (type GS); linear grid (type RS); grid with reinforced pins for operating temperature up to 1200 °C (type RR); grid double-thick netting for small and / or granular product (type CB). Type the edges of the grid: with loop-lock (easy connection to infinity); with sealed edge (prevents bending of thin materials); with drive chains on edges. For bottom grids available with a broad range of steel: ferrous, non-ferrous and combination. Also, a wide variety of refractory materials. Spiral grid Twente Flex it in