Implement warehouse steel sheets 3 tbsp. s= 2,4,5,6,8,10,12,16,20,25 mm

Sell sheet metal warehouse, Kiev.

Sheet 2 (G. K.) (1x2)
Sheet 2 (G. K.) (1.25 x 2,5)
Sheet 2 (G. K.) (1.25 x 2,5)
Sheet 2.5 (G. K.)
Sheet 3 (G. K.) (1.25 x 2,5)
Sheet 3 (G. K.) (1.25 x 2,5)
Sheet 3 (G. K.) (1,5x6)
Sheet 3 (G. K.) (1x2)
Sheet 3 (G. K.) (1x2)
Sheet 4 (G. K.) (1.25 x 2,5)
Sheet 4 (G. K.) (1.25 x 2,5)
Sheet 4 (G. K.) (1,h)
Sheet 4 (G. K.) (1,5x6)
Sheet 4 (G. K.) (1,5x6)
Sheet 5 (G. K.) (1.25 x 2,5)
Sheet 5 (G. K.) (1.25 x 2,5)
Sheet 5 (G. K.) (1,5x6)
Sheet 5 (G. K.) (1,5x6)
Sheet 5 (G. K.) (1,5x6)
Sheet 6 (G. K.) (1,5x6)
Sheet 8 (G. K.) (1,5x6)
Sheet 8 (G. K.) (2x6)
Sheet 10 (G. K.)
The sheet 12 (G. K.)
The sheet 12(G. K.) 2 x 6
Sheet 14 (G. K.)
The sheet 16 (G. K.)
The sheet 20 (G. K.)
The sheet 20, K. (2 x 6)
Sheet 25 (G. K.)
The sheet 30 (G. K.)
The sheet 40 (G. K.)
The sheet 50 (G. K.)
The sheet 60 (G. K.)

If You can't find interesuushie You products please contact us for advice.
We can also produce products under the order.

Yours faithfully Dmitry 063-291-06-22

Sheet steel

The steel sheet (steel sheet is a hot rolled sheet steel of a width of 500 mm or more is produced in the sheet steel thickness from 0.40 to 160 mm, in coils, of a thickness of from 1.2 to 12 mm

Specifications for sheet steel (mild steel) are regulated by GOST 16523-89.

Car manufactures in the form of sheets of steel and rolled steel grades St0, STK, St2ps, St2sp, STK, St3ps, st3sp, Strps, Strsp, Steps, Step, S5ps, Stcp, Strps according to GOST 380.

Hot rolled sheet and rolled steel in terms of coverage must comply with GOST 19903-90.

Sheet steel (mild steel) izgotovlivajut:
in coils, of a thickness of from 1.2 to 12.0 mm;
in sheets with a thickness from 0.5 to 160 mm

Cold rolled coil and sheet steel must comply with GOST 19904-90.

Sheet steel (mild steel) izgotovlivajut:
in coils, of a thickness of 0.5 to 3.0 mm;
in sheets with a thickness from 0.5 to 5.0 mm

Precision rolled sheet steel (mild steel) are divided into:
sheet steel (mild steel) increased accuracy (A);
sheet steel (mild steel) normal accuracy (B).

The flatness of sheet steel (mild steel) are:
sheet steel (mild steel) very high flatness - ON;
sheet steel (mild steel) high flatness - PV;
sheet steel (mild steel) improved flatness - PU;
sheet steel (mild steel) normal flatness - MO;

And by the nature of the edges of the sheets of steel (mild steel) are:
the steel sheets (sheet steel) with mill edge (BUT);
the steel sheets (sheet steel) with cut edge. d) in size.

The standard for sheet steel (mild steel) - GOST 14637

Sheets of steel (mild steel) corrugated (GOST 8568-77).

Corrugated steel is produced in rolls or sheets, one-sided rhombic or lenticular ribs.