Hydraulic press manual PG-400 STOCK

Hydraulic press with a "C"-shaped open maw and 360 degree rotating head makes it unnecessary surgery the opening and closing of the working part

Package contents:

Hydraulic press PG-400
Hexagonal matrix for crimp copper and aluminum lugs/sockets DIN sections 50, 70, 95, 120, 150, 185, 240, 300, 400 mm2
Plastic case for carrying and storage
Repair kit
Passport

Purpose:

Hydraulic press manual PG-400 with an open C-shaped maw designed for sealing and bonding aluminum and copper conductors wires and cables section 50-400 mm2 way test the use of cable lugs and sleeves DIN. Profile section in the place crimp - hex. For crimping and fillets pie lived in PG-400 uses a uniform matrix, suitable other opressovka "STOCK".

Advantages:

Hydraulic press with a "C"-shaped open maw and rotating 360 degree head makes unnecessary the operation of opening and closing the working part, which greatly facilitates and speeds up installation and allows you to work in places with limited access. Arm of plastic greatly reduces the weight of the tool. A special system reset pressure accelerates the process. The plastic case.

Description:

The power unit has dvuhplunzhernye system discharge. At idle the course uses the low pressure plunger, feed a large amount of oil in the system and the rapid movement of the piston with a weak effort. As soon as the working part meets resistance the processed material, actuates the valve system and activated the plunger high-pressure feed system oil under pressure, providing the task.

To protect the mechanism from damage the unit has a pressure limiting valve that is triggered when the operation is completed.

Procedure:

To choose the matrix in accordance with the cross section and material lived.

-Insert matrix into the slots until it clicks

-Place the conductor with ferrule (sleeve) between matrices. Turn the lever clockwise to lock the valve.

-Swing arm to produce the moulding to the safety valve.

-Turn the lever counterclockwise to unlock the valve. Press the lever on the shut-off valve, and the piston will return to original position.

In case you need to unlock can press at any stage of pressurization. For this purpose it is necessary to press the lever shut-off valve.

 

Security measures:

When using the tool, observe the sectoral and industrial safety measures.

-During operation, observe the technical parameters. The mismatch of the processed parameters of technical metal the characteristics of the tool will lead to its failure.

Conditions of storage and transportation:

Operating temperature -15...+ 40(C.

Temperature transport -25...+50(C.

Relative humidity 20 - 90 % non-condensing.

In case of finding the products at temperatures below -15(before you begin you must press withstand 3 hours at a temperature above +S. Otherwise, in the beginning of a possible leaking oil the area of the seals that will not be a warranty this opportunity.

Warranty:

The warranty period is 36 months from the date of sale, when the rules of work, conditions of transportation and operation at the presence of filled passport stamps on sale.

The warranty does not cover consumables: matrices, punches, pins, blades, sponges, cutting elements, paintings, etc.