Reducers H single-stage worm
Offer type: salePublished: 19.04.2013
| Seller: |  Pirozhkov Yurij |
| Phones: |  8(47241)7-57-73 89040847678 Show phone |
The gear H-80, H-100, H-125, H-160 universal single stage, is designed to increase torque and reduce speed as components in the drives of machines, equipment and mechanisms. The worm gear is connected with the clutch and gearbox in with bore (hollow slotted low-speed shaft) is mounted directly on the motor shaft.
Conditions of use: - load, constant and variable, one direction and reversible, with periodic stops and lasting up to 24 hours per day; - the rotation of the shaft in any direction; - the speed of the input shaft is not more than 1800 rpm; - external environment is non-aggressive, non-explosive; - atmosphere of types I and II with dusty air is not more than 10 mg/m³; - climatic performance, T for category 1-3 and climatic design UHL and for category 4 Options for the location of paws: without legs; from the side of the worm; - wheel side - side arrangement of the legs from the side opposite to the output end of the worm - lateral location of the legs from the output end of the worm.H-80-10-52-1-VU, where H = type gearbox (single-stage worm universal). 80 - center distance, mm 10 - gear ratio. 52 is a variant of the Assembly. 1 - layout of the worm pairs. 2 - design with paws on the part of the worm. In the presence of a fan of the gearbox. U - climatic. 3 - placement category of gear. This worm reducer, performed without legs and without fan has this symbol: H-80-10-52-1-1-U3. H-100 h-125 h-160
Conditions of use: - load, constant and variable, one direction and reversible, with periodic stops and lasting up to 24 hours per day; - the rotation of the shaft in any direction; - the speed of the input shaft is not more than 1800 rpm; - external environment is non-aggressive, non-explosive; - atmosphere of types I and II with dusty air is not more than 10 mg/m³; - climatic performance, T for category 1-3 and climatic design UHL and for category 4 Options for the location of paws: without legs; from the side of the worm; - wheel side - side arrangement of the legs from the side opposite to the output end of the worm - lateral location of the legs from the output end of the worm.H-80-10-52-1-VU, where H = type gearbox (single-stage worm universal). 80 - center distance, mm 10 - gear ratio. 52 is a variant of the Assembly. 1 - layout of the worm pairs. 2 - design with paws on the part of the worm. In the presence of a fan of the gearbox. U - climatic. 3 - placement category of gear. This worm reducer, performed without legs and without fan has this symbol: H-80-10-52-1-1-U3. H-100 h-125 h-160
