Brake tag 200-300-400 Electrohydraulically te-50

Hydrotalcite-50 include in your package the following components: frame, engine, bearing plate, a centrifugal wheel pump, frame pump, the clamping mechanism with the rod, the frame with the cylinder, as well as other complex units. Pushers TE-50 mounted on drum brake TAG - 300. The reservoir hydropushers TE-50 is filled with the working fluid - oil for transformers. Flooding and draining of oil in the tank electro-hydraulic pusher TE-50 through openings in the hull, which is locked by the latch ring for sealing. The ring has a protective function against leakage of oil. For hydropushers type TE-50 number of transformer oil is 2.7 kg. The working fluid should be change at least once in 2-3 months Brake TAG-160, Brake TAG-200, Brake TAG-300, Brake TGK-400 Drum brakes are designed to stop and hold the shafts mechanisms handling, metallurgy, road construction, warehouse and other equipment in a locked state when the idle motor. The working environment of non-radioactive, fire - proof. The content of the vapors of acids and alkalis in the acceptable range. When installed on the mechanisms, working outdoors, brake casing protects against falling rain and the action of solar radiation. Safety Brake type TAG with electro-hydraulic actuators are operated in the mechanisms of all groups mode with climate performance, recommended for the Northern, temperate, and tropical regions, due to the peculiarity of the negative impact of sharp fluctuations of temperature in the transformer oil used in electrohydraulically. For the mechanisms of movement and rotation of the valves are recommended brake TAG-160 and TGK-200 which provide smoother braking, especially for cranes, working outdoors. Brakes, picking electromagnets are used at different temperatures, with brake type• TAG-160 TCH-200-400