Hydrocyclone GCM 240

Hydrocyclone HZ 240 production LLC FOTOCOPIAS" protective lining of sintered, a temperature of 1800 - 2000C, solid carbide polikristallicheskogo silicon (IPC) used by enterprises in Ukraine, CIS and far abroad more than 40 years.

Performance nutrition with a solid content of 40% at a pressure of 0.1 MPa, m3/h 60

The inlet pressure, MPa (kgf/cm2) - 0.1 to 0.2 (1.0 to 2.0)

Cone angle, º - 10

Inner diameter, mm - 240

The equivalent diameter of the feed opening, mm - 65

The diameter of the drain hole, mm - 64

The diameter of the sand holes, d, mm - 20-50

The installation angle of the hydrocyclone to the horizontal of not less grad - 15

Length, mm - 600

Width, mm - 480

Height, mm - 1850

Weight, kg, not more than 280

Hydrocyclones are designed to efficient classification and thickening slurries, mineral separation by density (concentration) in the water environment or in mineral slurries of coal and other minerals, drilling fluid from different species when the drilling wastewater from heavy or light fractions including and from petroleum products.

Hydrocyclones are used as independently and combined in a battery.

Manufacturing of hydrocyclones be made according to the specifications approved by the Ministry of economic development and trade of Ukraine. LLC FOTOCOPIAS" has the certificate of conformity.

Hydrocyclones are made for different environments and for different particle size and fractional chemical compositions of minerals. Possible classification of mineral slurries hydrocyclones GCM 240/10, GCM 350/10 with boundary grain to 0.04 mm (40 microns)