Hydrocyclone GCM 500

Hydrocyclone HZ 500 with a protective lining of monolithic polycrystalline carbide silicon ( IPC ) is designed for thickening and recycling slurry of water and excretion from the water environment of solid mineral particles in coal preparation plants.

Performance nutrition with a solid content of 40% at a pressure of 0.1 MPa, m3/h 180

The inlet pressure, MPa (kgf/cm2) - 0.03 to 0.25 in (0,3-2,5)

Cone angle, º - 20

Inner diameter, mm - 500

The equivalent diameter of the feed opening, mm - 130

The diameter of the drain hole, mm - 150, 160

The diameter of the sand holes, d, mm 75-100

The installation angle of the hydrocyclone to the horizontal of not less grad - 15

Length, mm - 780

Width, mm - 800

Height, mm - 1950

Weight, kg, not more than 600

Hydrocyclones production LLC FOTOCOPIAS" protective lining of sintered, a temperature of 1800 - 2000 C monolithic carbide polikristallicheskogo silicon (IPC) used by enterprises in Ukraine, CIS and far abroad more than 40 years.

Hydrocyclones are designed to efficient classification and thickening slurries, mineral separation by density (concentration) in the water environment or in mineral slurries of coal and other minerals, drilling fluid from different species when the drilling wastewater from heavy or light fractions including and from petroleum products.

Hydrocyclones are used as independently and combined in a battery.

Manufacturing of hydrocyclones be made according to the specifications approved by the Ministry of economic development and trade of Ukraine. LLC FOTOCOPIAS" has the certificate of conformity.

Hydrocyclones are made for different environments and for different particle size and fractional chemical compositions of minerals. Possible classification of mineral slurries hydrocyclones GCM 240/10, GCM 350/10 with boundary grain to 0.04 mm (40 microns)