The spray gun ST3000 HVLP Auarita

Professional the spray gun HVLP system-II. Is a complete copy of SATA spray gun 3000 HVLP

Very cheap paint gun for applying finish coatings technology HVLP-II, which is special design the spray system and the reduction of pressure in the air cylinder, compared with inlet pressure gun. The combination of these factors leads to a sharp reduction of mist and, therefore, loss of material (savings up to 30 %). The efficiency of transfer of ink to the surface is about 70%

It the spray gun new generation HVLP system (low pressure). This spray gun provides the highest quality of application of varnishes and paints by the high savings material. The new nozzle design provides a broad, homogeneous torch, ensure uniform application of the material. A high level of atomization allows you to get the perfect filling when applying the finish paint the coatings. New ergonomic body design spray gun, optimized the center of gravity, lightweight and comfortable trigger allow large paint work without fatigue. Fully chrome-plated spray gun not only provides excellent appearance, but also greatly simplifies maintenance and care.
This spray gun all operations can be performed when using only one hand: setting the width of the torch (for painters right working hand and on the left). The handle of the regulator can be installed either on the right and on the left side.

Technical features:

• The diameter of the nozzle - 1.4 mm
• Air consumption - 430 l/min
• Working pressure is 2 ATM
• The size of the torch - 30 cm
• The optimal distance from the spray gun to the surface - 13-18 cm
• The volume of the tank - 600 ml
• Additional nozzles (sold separately) - 1,0; 1,3; 1,4; 1,6; 1,8; 2,0; 2.2 mm