High-speed automatic production line toilet paper

Brief description:

The line consists of raw parts, drive logs and high-speed orbeline saws. Raw material is loaded in the reel on the frame unwinding part, then passes through the block stamping, perforating unit, and winds up in the log. Adding trivago tail and trimming of the paper automatically. Next, the log is fed into the drive log. The drive necessary to dry the glue. After the drive, the log is fed to a conveyor saws, where a cut into rolls of desired length. Further, the rolls are Packed in a packaging machine. In the case of individual packing rolls of paper, between prematches part of your log set up an automatic machine for obanderolivaniya logs.

Specifications:

WINDING PART

The width of the source material, mm

1750

2150

2750

the diameter of the source material, mm

1500 (nee to order)

diameter of the socket of the source material, mm

3'(76mm) Other sizes are optional.

The size of the finished product, mm

90-150

The size of the Central pipe, mm

38-50

Perforation pitch, mm(distance between lines causing perforation)

4 knife ,90-160 (Other sizes optional)

2 knife ,180-320 (Other sizes optional)

Punch

4 forged knife

The setting of parameters

Screen screen

Control system

PLC, inverter

System tension control

Encoder, PLC, inverter

Mechanical control

Synchronous belt

Engine, V/Hz

380/50

Pressure, MPa

0.5-0.8 (Installed by user)

Performance, m/min

200

Rewinding paper hour

1-3 hours (the Number of rolls of the source material

must be specified in the order)

Embossing

Embossed steel - steel,Steel-rubber (determined by customer)

The number of print modules

1-2 (determined by customer)