Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  construction methods, handling machinery

Machine for the manufacture of cinder blocks with the manufacturer's plant in Dnepropetrovsk.

Offer type: salePublished: 28.02.2015
Price:negotiated
Company:ASVgroup
Seller:Lyisenko Aleksandr Sergeevich
Phones:
Show phone
Write a message
Address:Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk
Description
Purpose:
• Vibrotek - hand compact installation for the manufacture of cinder blocks (building blocks) is intended for private production in construction or personal use by private developers.
• Set consists of: housing Assembly (matrix), mechanized lifting matrix in two forms, the presser frame, special switches (and the elements of engine starting), vibrator
Rules of operation cinder block machine:
1. Enable vibrotek into a 220V electrical outlet with a grounded wire.
2. Time machine is running short (up to 2 minutes continuously).
3. The motor of the vibrator should not overheat.
4. Daily view of the mounting of the vibrator and eccentric (tighten if necessary)
5. Water (moisture) and the solution should not get on the on/off switch on the motor housing and the current-carrying wire.
6. After the operation, the machine must be cleaned.
The principle of operation of the apparatus for the production of cinder blocks:
The batch in the mixer hard concrete (water / cement ratio of 0.5), the maximum cone without impurities (organic, clay, and others );
Loading machine;
The stacked alignment of the mixture in the machine trowel to the desired level, and if you want this is Stikovica the mixture into the corners of forms;
When the vibrator within 20 to 60 seconds, depending on concrete quality, this is achieved experimentally in the process;
Vibrator disable when lifting the machine;
Unit ready " ...next!
Those. feature cinder block machine:
Device type - bespodobny, manual.
The type manufactured products - the building blocks
Performance PCs/hour - 50...70; Up to 600 units for 8h. change
Unit weight - 12-15 kg;
The installed capacity of the electric drive, W - 200
The voltage of the supply mains, To - 220 single-phase household.
Speed, rpm 3000
The dimensions of the mechanism, mm
length - 750
width - 650
height - 1300
weight, kg - 45 (can be transported in the trunk of l/car 1 machine)
The machine is equipped:
Machine 2 unit installed vibrator on 200W. ; Clamping frame; instruction manual; concrete compositions
The magnificent setting is highly appreciated by our clients. This is the smallest machine in the production well able to compete in terms of productivity and quality blocks with other more costly.