Vibrotek for the production of cinder blocks Mars, at an affordable price in the Crimea.
Offer type: salePublished: 28.02.2015
| Price: | negotiated |
| Company: | ASVgroup |
| Seller: |  Lyisenko Aleksandr Sergeevich |
| Phones: |  +38(066)610-60-68 Show phone |
| Address: | Ukraine, Autonomous Republic of Crimea, Simferopol |
Characteristics of the equipment
Performance 90 units/hour
The installed capacity of electric 0,15 kW
Supply voltage 220 V
Weight 45 kg
Length 550 mm
Width 440 mm
Height 1550 mm
The dimensions of the mechanism makes it possible to transport in the trunk of a car up to 2 machines.
The duty cycle of the mechanism is as follows:
the batch in the mixer hard concrete (water / cement ratio of 0.5), the maximum cone without impurities (organic, clay, and others);
loading machine;
the stacked alignment of the mixture with a trowel to the desired level, and if you are used Stikovica the mixture into the corners of forms;
when the vibrator within 20 to 60 seconds, depending on concrete quality, this is achieved experimentally in the process;
the vibrator is turned off when lifting the machine;
unit ready " ...next!
To the cinder blocks quickly gained strength we recommend you to use plasticizing additive Betapress which contributes to the rapid setting concrete.
Rules of operation
To enable the machine to the network 220 with a grounded wire.
Time machine is running short (up to 2 minutes continuously).
The motor of the vibrator should not overheat.
Water (moisture) and the solution should not get on the on/off switch on the motor housing and the current-carrying wire.
After the operation, the machine must be cleaned.
Warranty
Subject to the terms of use, warranty is made within 1 month from the date of sale (date and signature must be affixed in this guide).
For repair or replacement during the warranty period, the machine Assembly is transferred to the place of sale.
Repair or replacement of the engine is carried out within 7 days from the date of return of the machine.
After repairs, the warranty is extended to the specified term of the relevant entry in the manual of the machine.
