Fundamentals of vibration diagnosis and Exercise machine diagnosis with the Schwingungsanalysator

The training course ТОР-103 "fundamentals of vibration diagnosis and machine diagnosis" is for aspiring and advanced specialists to recommend. If you already have Systems for vibration diagnosis or a successful Diagnostic service want to set up, the course may best meet your requirements meet.

The training course are Schwingungsanalysatoren BALTECH VP-3470 and CSI 2600, CSI and CSI 2125 2140, as well as solutions and programs for Balancing BALTECH Balance.

Professional training of Schwingungsdiagnostiker is in the course of 40 hours (5 days) and begins with the testing according to the concept of "Zuverlässigkeitstechnologien" (Reliability technologies).

1) training for vibration diagnosis - 22 hours

2) Exercises with portable, Stand - and permanently installed Systems, 16 Hours,

3) Theoretical and practical tests for the Vibration Diagnosis - 2 Hours.

The program of the Schulungskurses for vibration diagnosis ТОР-103 includes:

- the concept of "Reliability technologies" as the basis of the Entity of machine maintenance

- Choice of Diagnostic techniques and maintenance and Reparaturform

- Methods of technical diagnostics. Practical Exercises with new Schwingungsanalysatoren BALTECH VP-3470 and CSI 2140.

Introduction in the Maschinenschwingungslehre. Terms and definitions. Schwingungsparameter. Phase. Combined Waveform. Natural frequencies. Resonance Detection Methods. Spectral analysis. 1 - and 1/3-Octave band spectrum.

- Low-, medium -, and high-frequency vibration, your Properties. Trends. Forms of Monitoring and diagnostic systems. Requirements to Schwingungsanalysegeräten. Vibration measurement and standards.

- Self-excited and forced vibration, natural frequencies the systems with vibration. Pick-up sensor. Practical Exercises with the Balance system BALTECH VP-3400 and the Schwingungsanalysatoren CSI 2140 and BALTECH VP-3470.

- Monitoring of the current state according to the international Standards ISO 10816. Schwingungsstandards and standards. Practical Exercises.

Methods and procedures of the vibration measurement. Identifying characteristics for vibration analysis of dynamic machinery (pumps, compressors, electric motors, Gearboxes, Rolling bearings, plain bearings, fans, etc), machine diagnostics.

Equipment and machine diagnosis. Analysis of the Signal: frequency, duration, Dämpfungsgeschwindigkeit, static and non-static waveforms.

- Schwingungsausgleich and machine diagnosis.

- Monitoring of the load on the storage units. Dynamic balancing with its own bearing. Static and Momentenunwucht the rotors.

- Stationary and Standsysteme the vibration monitoring and the protection CSI 2600 and BALTECH VP. Practical Exercises with the Vibration measuring device BALTECH VP-3470 and the balancing machine BALTECH HBM.