Vibration diagnosis of rolling bearings, new equipment, requirements for specialists and engineers

The new Schwingungsanalysator BALTECH VP-3470 is to detect the Wälzlagerfehler by specialists and Engineers from the Department for vibration diagnosis of industry and Service organizations.

The Devices of the series BALTECH VP show today, the best ratio of price and the mode of operation. Our branches in NY, Astana, Sankt-Petersburg and Lübeck (Germany), the devices provide the fast and offer free Training for your engineers and specialists in the framework of the course ТОР-103 "basics the Maschinenschwingungsdiagnose".

The Rolling is one of the frequently used components for respective Rotor (dynamic) Equipment, so his condition is always of importance. So we recommend the affordable Minilabor BALTECH OA-5000 to Express oil analysis.

Wälzlagerfehler are sometimes hardly recognizable. Errors can be due to poor Lagerkontaktflächen arise. The error can, even under the microscope almost to be invisible. The Problem can be more complicated than the error itself. Very often, a defective bearing or lubrication is used, or the Bearing load is incorrectly distributed.

Main reasons of Lagerausfällen:

· 40% - Lack of lubrication (Surplus or deficit). To solve the problem fit Minilabore BALTECH OA.

· 20% - Poor mounting (Hammer, welding, Etc.). To the solution of the problem fit Induction Erwärmungsgeräte the series BALTECH HI-1630 and the tool set BALTECH TOOLS.

· 20% - other reasons (e.g., incorrect application, Werksmängel, increased vibration before and after the Installation). To solve the problem be Wälzlagerprüfungsstände BALTECH BCM-6150 offered.

· 11% - Increased Misalignment. To a solution of the problem of Laser-Ausrichtsysteme the series BALTECH SA-4300.

· 9% - Normal Life Expectancy. In order to solve the Problem, you have constant Vibration diagnosis of rolling bearings with the Schwingungsanalysator/Auswuchtgerät BALTECH VP-3470 exercise.

· Statistically cause the unbalance and offsets up to 30% early Bearing failures. To solve the problem, adjust machines for balancing mechanical parts of the series BALTECH HBM and the Auswuchtgerät BALTECH VP-3470 with the Software BALTECH Balance.

· Some sources of information are reports that approximately 10% of all bearings are faulty, which before its installation turns out. The solution of the problem consists in the participation in our training course BL-201 "Reliability of the bearings and rules for installation and use of rolling bearings".