Balancing of wheels, dynamic Rotorauswuchten
| Price: | negotiated |
| Company: | Kompaniya BALTECH GmbH |
| Seller: |  Roman Romanow |
| Phones: |  +49 (0) 451-370-87-700 Show phone |
| Address: | Germany, Hamburg |
Balancing of impellers and shafts of industrial Execution is easy and fast with the new portable balancing system of the Series BALTECH VP-3470. The peculiar System is in the suitcase delivered, the Auswuchtverfahren "step by step" is user-friendly. The System was of us for a workshop experts, who attend all layers are developed.
Auswuchtverfahren for wheels and waves is easy.
1) Bring a pick-up sensor on the Bearing housing and a photo-Drehzahlaufnehmer the Magnetprisma. Turn on You will use the device.
2) measure the Ausgangschwingungspegel. Turn On the device consists of.
3) Bring a test mass on the impellers, shafts or Coupling. Turn on the device again.
4) Messänderungen after Attaching the test mass a. Turn on the device.
5) The Schwingungsmess-/Auswuchtgerät BALTECH VP-3470 makes the angle and the weight of the Ausgleichmasse in grams calculate, on a shaft (impeller) is to be affixed.
6) Start the device and save the received vibration levels. Save the Auswuchtbericht on PC in Program BALTECH Expert (in the basic equipment available).
Technical data - amplitude and phase Measurement for Balancing the waves (wheels):
- Speed Range Of 0.5...2000 Hz,
- Frequency-tolerance +/- 1%,
- Phasentoleranz +/- 5 Degrees,
- Amplitudentoleranz +/- 1 dB,
- Self-control - control of the Aufnehmeranschlußes
- Units of measurement of the Amplitude - dB, g, m/s2, mm/s, mkm
If necessary, you can use the Auswuchtgerät BALTECH VP-3470 to the balancing of shafts and wheels for rent.
