Balancing of Kurbelrädern and discs, balancing on special Devices
| Price: | negotiated |
| Company: | Kompaniya BALTECH GmbH |
| Seller: |  Roman Romanow |
| Phones: |  +49 (0) 451-370-87-700 Show phone |
| Address: | Germany, Göttingen |
The new analyzer with the Auswuchtprogramm the series BALTECH VP-3470 is a peculiar development of our society. Now is balancing of Kurbelrädern, discs or wheels only in a few steps carried out. The training Auswuchtstand makes all the Unwuchtmerkmale Kurbelräder, disks, and impellers in the context of our Schulungskurses TOP 102 "Auswuchtgrundlagen" is clearly visible.
Unwuchtmerkmale. Remarks.
1) If there are other essential drehfrequenzfache
Oberwellenspitzen, there are also other errors are possible.
2) When a value of 1X in the parallel alignment - 3-5-times larger than the others, is
also any other error (e.g., resonance).
3) The imbalance is always created on the 1Хtop,
but 1Х top is NOT ALWAYS of the unbalance
Phase measurement.
1) Check the Phase in the Horizontal and Vertikalpositionen (you must
to 90 degrees +/- 20 degrees different). Remark. If the Phase a 0o-
or 180o-rotation +/- 30 degrees power, check the response.
2) If the Phase is unstable, you should check whether the device
losgeschraubt.
3) Check the Phasenhäufigkeit. Perform the measurement with the device
BALTECH VP-3470 three times. The frequency and deviation must not
less than 3%.
Main technologies used for the balancing of machines, Kürbelrädern, slices, and
Impellers.
1) Graphical manual Vektorverfahren
Manual balancing with the strobe BALTECH VP.
- Automatic Balancing. The technology is sometimes referred to as
Koeffizientenmethode called.
