Balancing of fans, and Share with the portable Auswuchtgerät

For the balancing of fans in operation is special Auswuchtausrüstung necessary. The new special System BALTECH VP-3470 is to Balancing of Parts, impellers of the fan and Abgassauger as well as the respective Rotors with own bearing.

On the first Auswuchtstufe the fan you have to Auswuchtdaten clarify.

- Number of Auswuchtebenen. A Auswuchtebene is a layer in the cross-section of the rotor to fit Mass.

- Number of measuring points. A Measuring point represents a point at which the vibration of the level measured . There must be at least one measuring point for each level will be selected.

What does balancing of Parts (rotors), with its own bearing?

- Balancing of fans (Machines) according to your Installation location, where they operated.

- The manufacturer's specific data can the state do not match.

Unique Ausmontierung from The Rotor can have properties in different ways change: applied power changes, the Erosionsverschleiß, Massenanhaften etc

Peculiar Auswuchtausrüstung the series BALTECH VP-3470 has a 2-channel version and the Software used for the storage of Auswuchtberichten BALTECH Expert.

What are the advantages of the balancing of fans (rotors, Parts) with own bearing?

1) balancing of fans (Share) with your own bearing journals, is run. You have no parts ausmontieren and after balancing replacing.

2) balancing of fans (Share) is at the frequency of operation is carried out. Balancing of machines for balancing mechanical parts you can not reach operating speed.

3) balancing of fans (Share) in-load running. Strength parameters of the Bearing the same operating parameters.

4), A Rotor (a part of) works as in normal operation.

5) There is no need a Rotor auszumontieren, install, again measurements.

6) time for the repair, the Schwingungsausgleich, the standstill is reduced considerably.