Auswuchtmethoden for rigid and flexible rotors, Endauswuchten of turbines

There is a Lot of Auswuchtmethoden related to Rotortyp: flexible or rigid. The company BALTECH invite to training course, TOP-102 "dynamic methods Auswuchtens after Einflußkoeffizienten“.

The Main task and the purpose of the dynamic balancing (e.g., the Turbinenrotoren) consist in the elimination of the residual unbalance. Turbinenrotoren after the The on-site Assembly work normally.

After Balancing with the new Schwingungsanalysator BALTECH VP-3470 must Rotorschwingung, the residual unbalance is caused, the values of the existing tolerances and standards are subject to. One gent davo from that of rigid rotors of the machine vibration level the speed increase linearly increases, whereby the Resonanzparameter Plants has to be considered. Resonanzparameter, you can use the program for Vibration diagnosis BALTECH Expert measure and analyze. Normal function of flexible rotors (e.g., balancing of turbines) means that your Flexibility on the respective rotor speed permissible tolerances comply with.

After The production of the respective Rotor must be his static and Momentunwucht check. For the testing of static unbalance fit normal Messschneiden or Bearings, exactly in the horizontal direction with the accuracy of 0.02 mm with the Präzisionslaserniveau BALTECH LL-9110 need to be set. Then you can each Auswuchtmethode choose and Endauswuchten with the Schwingungsmess-/Auswuchtgerät BALTECH VP-3477 or the new Schwingungsanalysator BALTECH VP-3470.

Balancing turbines, compressors, pumps, or only dynamic balancing of the Machine advance, and then, if there is an access to the Rotor, Endauswuchten in the operating speed in the area. You must understand, the Auswuchtqualitätskontrolle increased vibration can be detected due to the Lagerversätze, Fundamentfehler or Antriebsfehlausrichtungen.