Automatic line endless splicing LGC 300 compact-basic (Italy)

I will sell a line of continuous splice wood Spanevello LGC 300 - Non-driven roller conveyor at the entrance - Speed manual miter saw - Drive roller conveyor for conveying workpieces on-line splice Automatic end milling machine - Automatic press for continuous action - Hydraulic station - Automatic unloading device - The control panel DISTINCTIVE FEATURES: Milling, gluing rollers and pressing install combined in one machine (the index "Compact") that allows you to perform consistently, quickly and functionally; Ability to work with pieces ranging in length from 1200 to 4000 mm; The maximum cross-section of the resulting workpiece 100x250 (200x300)*mm; The possibility of obtaining the length of the finished products of unlimited length**; Simultaneous formation of microchip at the end of the previous and the beginning of the next billet two cutters; Moving milling sites with ball screw along the guide rails on the linear bearings; Anticline nylon contraban on each milling site to protect the workpiece from damage from both ends; The package already included gluing rollers system for PVA, one - or two-component adhesives; Metered adhesive application (adjustable via CNC) on both ends of the workpiece special applicators with anti-adhesive coating; High power compaction of not less than 20 tons (optional, up to 50 tons); Removal of excess glue special scraper rollers after pressing; Automatic trimming of products in set size (length is specified via CNC); Automatic unloading device for the finished slat length up to 12 meters; Security and ease of use; Cheap! Call ask.