Max load: 1200 W
Detection range: 12m
Detection angle: 180
Detection speed: 0.6-1.5 millisec.
Delay: 10sec - 7 min
Protection degree: IP44
Installation height: 1.8-2.5 meters
Dimensions: 86.4 x 60.4 mm
Country of origin: Germany
Housing material: plastic
Warranty: 3 years
Code: ST-09B BLACK
This wall-mounted motion detector with detection angle of 180 degrees and the ability to operate from the smallest movement to a distance of 12 metres. Additionally you can rotate the "head" of the sensor up and down to change the angle of vertical detection. Motion sensors with a similar design ideal for installation in stairways, as they can be directed to the bottom of the stairs. Thus, the sensor will be triggered even when someone sets foot on the first step.
The maximum load that can be connected to this sensor, is 1200 Watts. Burn time is connected to the light sensor can be set manually using the slider. Thus, in the leftmost position controller lighting time after the sensor detected motion, will be only 10 seconds. And in extreme right hand position as much as 7 minutes.
In addition to time, you can set the light level of the environment where the sensor will not work. For example, during the day, when all is light, you do not want the motion sensor is continuously switched on the lights. Therefore, the dimmer turn right to the sensor worked, beginning at dusk, or when it is already dark.
The protection degree is IP44 sensor, so you need to protect from direct exposure to water.
Motion sensor Euroelectric made in Germany meets all European quality standards ISO 9001 and has a 3 year warranty.
If You have questions, or need advice on if the motion sensor is ask right now.