The motion sensor on the wall ST-10A black.Warranty 3G.
Offer type: salePublished: 10.04.2015
| Price: | 177 UAH |
| Seller: |  Parfenyuk Andrej |
| Phones: |  099-141-21-31 Show phone |
| Address: | Ukraine, Vinnytsia Oblast', Vinnytsya |
Code: ST-10A Black
Max. load, W: 1200
Color: black
Detection angle: 180
Detection distance: max 12
Detection speed, m/s: 0,6-1,5
Delay: 10sec - 7min
Robocza temperature: -20...+40
IP protection: 44
Voltage: 220/240 50-60Hz
Installation height: 1.8 to 2.5
Illumination LUX: 3-2000
Dimensions, mm: 144 x 87,4
Wall-mounted motion sensor from the German company Euroelectric, which is able to capture the movement of the smallest objects at a distance up to 12 meters. The speed of detection, thus, does not exceed 1.5 m/s.
The motion sensor should be installed at a height of 1.8 to 2.5 meters. It is in this range it will work as efficiently as possible. The detection angle of the sensor is 180 degrees. If necessary, it can be more precisely directed in the right direction, as the "head" of the sensor moves not only up-down and left-right.
For more fine adjustment of the operation of the motion sensor it contains three controls:
1)the Regulator lighting delay after the sensor detected motion. Lighting time can be set in the range from 10 seconds to 7 minutes.
2)control the brightness of the lighting, in which the motion sensor should not work. For example, during the day, when enough light.
3)the sensitivity of the sensor. With this control you can set the motion sensor so that it did not work on small objects. For example, to Pets.
When mounting the sensor, it is important to remember that he has protection IP44, therefore it is not desirable to him flushed with water, or other rare substances. Operating temperature can be used virtually in any room.
Manufacturer Euroelectric ensures stable and continuous operation of the motion sensor during 3 years. Practice has shown, under the conditions of use of the motion sensor is capable of working much longer.
Warranty.
This sensor has a 3 year warranty. In case of warranty replacement of the sensor is not taken away for examination, and just changed to a new one.
Replacing the sensor may be denied only in the case when there is any physical evidence, no original box, or if a malfunction has become a high surge (in this case, it has a characteristic smell of burning rubber).
If You have questions, or need advice on if the motion sensor is ask right now.
