Exhaust fans, blower fans, NAM-6,3 (VDN-6,3)
Offer type: salePublished: 15.04.2015
| Price: | negotiated |
| Company: | ChP 'NasosProm' |
| Seller: |  Gennadij Evgen'evich |
| Phones: |  0667079081 Show phone |
| Address: | Ukraine, Kirovohrads'ka Oblast', Kirovohrad |
Impeller diameter, mm: 630
Productivity, m3/hour: 700-7900
Pressure, PA: 240-1350
The exhauster DN-6,3 - designed to move air and flue gases, explosive gas mixtures, the aggressiveness of which in relation to carbon steel of ordinary quality are not higher aggressiveness of air containing sticky substances, fibrous materials, with different content of solid impurities in an amount of not more than 100 mg/m3.
The DN-6,3 designed to move in the environment with temperature from 20°C to 200°C, while the ambient air temperature should not be below -30°C and above 40°C.
Exhaust fans are designed for operation in conditions of temperate and tropical (T) climate, location category 2 as per GOST 15150-69.
Use the exhaust fans in the conditions of the placement category 1 subject to the protection of the motor from environmental influences.
Exhaust fans are used in systems dust purifiers installations, gas boilers, ventilation systems, air heating and for other industrial purposes in the area of the lack of permanent jobs.
Centrifugal exhausters are made left and right directions of rotation. Left is the rotation of the impellers against the direction of movement-clockwise, if you look at the exhaust fan on the motor side; accordingly, the right is considered to be a reverse direction of rotation.
