Bizator  /  Adverts  /  consumer and industrial goods  /  furniture  /  furniture

Adhesive postforming Eurobond

Offer type: salePublished: 28.04.2015
Price:200 UAH
Company:Uventus Group
Seller:Shinkarenko Ekaterina
Phones:
Show phone
Write a message
Address:Ukraine, Kyiv

Eurobond L200 - contact adhesive for spray application, has good initial strength and good heat resistance. The glue gives a strong and elastic seam.
Technical data:

Raw material basis: Polychloroprene rubber Dry residue: about 18% Density: about 0,83 g/ml at 25° C Viscosity: about 350 - 550 MPa Color: red Application method: spraying (nozzle O 2.0 – 2.2 mm) Glue consumption (depends on particle Board and laminates): 60 – 70 g/m. Pressure: 2-6 bar The open time: about 1-3 minutes, depending on temperature, substrate and method of application Time closed extracts: about 20 minutes Cleanser: The solvent 31 Shelf life: about 6 months in a tightly closed container Storage temperature: Not below + 10°C, sensitive to frostapplication instructions:
The adhesive should be applied to both surfaces using spray. After applying the glue should be kept open air allotted time. This time depends on the thickness of the adhesive layer, bases and conditions in the working area. The best time for bonding occurs as soon as the film over the adhesive layer ceases to be wet but remains sticky. The surface must be positioned exactly as subsequent changes are impossible.