Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  heating engineering, boilers

Check the tightness of the VPS 504 S01

Offer type: salePublished: 09.04.2016
Company:TOV 'NTO SATRONIK'
Seller:Oleg Nikolaevich
Phones:
Show phone
Write a message
Address:Ukraine, Sums'ka Oblast', Sumy

Only with us you can buy a package of leakage control DUNGS VPS 504 S01.
Block the leakage control Dungs VPS 504 S01 is used to control the solenoid valves DMV series and different gas blocks. With the adapter this unit can also be installed on solenoid valves with Dungs DN80 with a bypass line and without it. There is modification in the performance for the liquefied gas. This unit is in the range of valid values pressure, independent from the preset options. The tightness or lack thereof is indicated by the color lamps in the housing.

Operating pressure, mbar

max. 500 (50 kPa)

Controlled volume, l

=4,0

Rated voltage, V

230

Frequency, Hz

50

Consumed power, VA

At the time of discharge approx. 60 VA, during operation 17 VA

Fuse (the building), And

10A, fast-acting, or 6.3 A, inertial

Built-in fuse, replaceable

Fine fuse T6,3 L250; IEC 127-2/III
(DIN 41662)

Switching current, max. 4AType of protectionIP 40
Ambient temperature, from -15°C to +70°Copening Time, secondsapprox. 10-26 h, depends on the controlled volume and input pressuresensitivity Thresholdmax 50 l/hturn-on Time control100% ED (Rel. cont. incl.)Max. the number of control cycles20/h After more than 3 executed one after the other cycles
you must wait at least 2 minutes
Assembly Positionvertical, horizontal, but not upside downEnvironmentthe neutral gas environment, not suitable for butane

IN STOCK.