Satronic DMG9 70 mod 01
Price: | negotiated |
Company: | TD Favorit |
Seller: | menedzher |
Phones: | 0506033570 Show phone |
Address: | Ukraine, Kyiv |
Designed for 2-stage gas burners with boosting and combined (gas/diesel) Possible flame sensor:
– Ionization probe
– Infrared detector IRD 1020.1
– UV sensor UVD 971
Furnace machine DMG 970 controls the power of the gas burners and combined (gas/diesel). Furnace machine is inspected and certified in accordance with relevant European standards. Perhaps the use of stationary air heaters according to DIN 4794.
With the help of a program controlled microprocessor, set the maximum stable time-independent voltage fluctuations in the network, temperature environment and/or on cycles. Built-in information system not only contributes to the continuous monitoring of events (especially important to control the start-up phase) but also informs about the possible cause emergency shutdown. The cause of the fault stored in the instrument memory and can be restored even after a power cut. Automatic furnace is designed for maximum safety in case of voltage fluctuations. If the voltage in the network falls below an acceptable level, the operation stops and the furnace prevents the automatic repetition of the startup procedure. Thus, the security of the system is not exposed when the voltage drops in the network. The low voltage protection works not only during startup and continuously during operation of the burner.
Honeywell ensures high stability of ignition, regardless of voltage fluctuations, ambient temperature and/or on cycles. Built-in information system not only provides continuous monitoring of the actual state of the device (which is especially important for monitoring the start-up phase), but reports about the possible cause of automatic shutdown.
Automatic ignition ensures maximum safety in case of voltage fluctuations of the mains. If the supply voltage drops below the permissible level, the operation is interrupted and the machine locks if you try to re start. This protection against voltage drop acts not only at startup, and continuously during operations.