Measuring converters of temperature PVT-01-1-1-40-60

Converters measuring of temperature PVT-01 is intended for transformation the temperature of gaseous, liquid and solids in the output analog electrical signals.

Temperature sensor PVT-01 is used for use in industries of petroleum, oil refining, petrochemical industry for the production of mineral fertilizers in hazardous areas in which explosive mixtures gases according to GOST 12.1.011.

Specifications temperature sensor PVT-01:

- 1 - from minus 50 to 50 ° C;

Limits permissible basic reduced error of thermal converters HTP-01 when the transformation temperature is ± 0,5%.
Variation of the output signal of the thermocouples does not exceed 0,2 of the boundaries of the basic reduced error.
Additional error of the temperature sensor PVT-01 when converting temperature caused by changes in ambient temperature in according to group C4 according to GOST 12997, does not exceed half the limit permissible basic error for every 10 ° C.
The power to the thermocouples is provided by a DC source with voltage of 12 to 40 V.
The power which is consumed by the thermocouple does not exceed 1V · A.
The range of variation of the output signal of the thermocouples is 4 - 20 mA. The output signal has a linear dependence on the measured temperature.
The average service life of the thermocouples at least 12 years.
Material of protective reinforcement for thermocouple all versions - steel KH23JU5, 12X18H10T, 08KH13.
Conditional pressure of measured environment for all versions of the thermocouples does not exceed 10 MPa.
The length of the Assembly part 60mm.

In stock - 1pc.