Tower crane QTZ63

Description of construction tower crane QTZ63

1. Nominal lifting moment of the crane 630 KN.m. Maximum crane lifting capacity 6 tons, maximum operating reach 50 m.
    
2. Lifting height stationary free standing type – 39 type m Side of this tower crane allows you to lift loads to a height of 140 m, which is suitable for the construction of both industrial and residential buildings up to 45 floors. All metal elements of the tower crane is made of high strength steel, which prolongs the life.
    
3. A six-ton lifting device of tower crane operates from two speed single motor with a wound rotor, and eddy braking, which reduces current and dampen the inertial currents when adjusting speed and change of level; to significantly increase the service life of the contactor, to provide a relatively high resistance and reliability of the design, to improve the accuracy of targeting in place. According to the requirements of consumers, the hoist mechanism can apply a three-speed motor
    
4. Also in this tower crane provides a double pendant, horizontal arrow, to change the departure used cargo truck.
    
5. Tower crane QTZ 63 applies a rotation mechanism of a series of ODM POTAN French company. In this mechanism applies advanced electrical engineering, electromagnetic clutch and planetary reducer, non-polar speed controller. Starting torque is large, rotation smooth, advanced technical features.
    
6. System security microprocessor with digital display of information JTWL6/8/10 Cat Load Out (PRC), is possible to install the PMC-160B-15 Russia.
    
7. Crane cab metal with remote air-conditioning system cooling and heating, adjustable seat, adjustable sun shade, wiper blade, socket 220 V.
    
8. Three types of installation of the tower crane:
   A) concrete pad
   B) on the d-pad
   C) rail move

Main material of mast: square steel pipe ღ 135 x 135 x 12 or submerged arc welding when closed quadrad ∠ 125 x 12 or one angle iron∠ 160 x 16 .Mast size:1800 x 1800 x 2800 or 1600 x 1600 x 2500 (the structure of one corner of iron), the material can выбиратьQ345B.AC contactor, hot protector uses high quality products, Sineide that is stable and reliable. The structure of the products adopts professional manufacturer that is stable and reliable in operation.

Capacity: 6 tons
Boom length: 50 m
Stationary height: 39 m.
Lifting height: up to 140 m.

Specifications tower crane QTZ-63 (5013)

Pokazatelemvysokogo lifting and грузоподъемность4-fold superoutburst (m/min)4.519.540 load Capacity (t)6632-fold superoutburst (m/min)93980Грузоподъемность (t)331.5 rotation Speed (R/min)0/0.7 the Rate of departure (m/min)42/21Скорость of Samovodene (m/min)0.5 Minimum lowering speed (m/min)Not more than 5

 

The rated load moment (m)630Высота polyembryony (m)39Приставной (m)140Максимальная load capacity (t)6Грузоподъемность at max. reach (t)1.3

Work departure

max. (m)50 min. (m)3Скорость podjemnik. (m/min)80min. (m/min)4Скорость povorotniki. (m/min)42мин. (m)21Скорость of rotation (r)0~0.63 a Speed of Samovodene (m)0.5 the Mass of the crane (not including mass balances) (t)33Температурный mode (°C)-40 to+40Кол in вагонов5