Corner (window) Frazier
Offer type: salePublished: 14.04.2018
| Price: | 5 500 EUR |
| Seller: |  Evgenij |
| Phones: |  050-716-04-69 Show phone |
| Address: | Ukraine, Kyiv |
Corner (window) Frazier
ROJEK FS-550
with the automatic document feeder (2014 vol.)
Electric motor power S6 40% 7.5 kW (9,2 kW)
The revolutions of the motor 2 900/min.(3 480 in/min.[60Hz])
Spindle diameter 40 mm (30 | 50 | 32 | 35 mm)
The spindle speed 3 000; 4 500; 6 000; 8 000; 10 000/min.
Max.the rise of the spindle 200 mm
Spindle length 233 mm (193 | 263 | 193 | 193 mm)
The clamping length of the spindle 180 mm (140 | 220 | 140 | 140 mm)
Max.the diameter of the holes in the table 330 mm
Max.tool diameter under the table 320 mm
Max./min. tool diameter when profiling 250 / 80 mm
Max./min. tool diameter when chiorescu 350 / 80 mm
The size of the machine
Length 2 510 mm
The length of the guide carriage 3 270 mm
Width 1 020 mm
Width with carriage 2 035 mm
Table height 900 mm
Mac.machine height 320 mm 1
Table dimensions 1 200 x 780 mm
Dimensions table extension ahead 658 x 450 mm
The size of tenoning table 1 050 x 330 mm
Height of tenoning table mm 947
The angle tenoning table +60° / -90°
Progress tenoning table mm 1 470
Diameter suction 120 mm
Net weight 925 kg
Almost was not in operation.
Electric motor power S6 40% 7.5 kW (9,2 kW)
The revolutions of the motor 2 900/min.(3 480 in/min.[60Hz])
Spindle diameter 40 mm (30 | 50 | 32 | 35 mm)
The spindle speed 3 000; 4 500; 6 000; 8 000; 10 000/min.
Max.the rise of the spindle 200 mm
Spindle length 233 mm (193 | 263 | 193 | 193 mm)
The clamping length of the spindle 180 mm (140 | 220 | 140 | 140 mm)
Max.the diameter of the holes in the table 330 mm
Max.tool diameter under the table 320 mm
Max./min. tool diameter when profiling 250 / 80 mm
Max./min. tool diameter when chiorescu 350 / 80 mm
The size of the machine
Length 2 510 mm
The length of the guide carriage 3 270 mm
Width 1 020 mm
Width with carriage 2 035 mm
Table height 900 mm
Mac.machine height 320 mm 1
Table dimensions 1 200 x 780 mm
Dimensions table extension ahead 658 x 450 mm
The size of tenoning table 1 050 x 330 mm
Height of tenoning table mm 947
The angle tenoning table +60° / -90°
Progress tenoning table mm 1 470
Diameter suction 120 mm
Net weight 925 kg
Almost was not in operation.
The cost of the machine 5 500 Euros.
The machine is located in Kiev.
