К232А single-crank Press open tiltable, us 10 t
Offer type: salePublished: 21.04.2018
| Price: | 32 000 UAH |
| Company: | Chastnoe litso |
| Seller: |  Viktor |
| Phones: |  0953669277 Show phone |
| Address: | Ukraine, Kyiv |
Cant open single-crank press, us.10 t К232А is intended for cutting, shallow drawing, bending, cold forging, and other works.
Frame can be tilted at an angle that makes it easier to eat extruded products. The slide is hard ejector.
Control is via the pedals, connected with located on the frame two buttons. The mechanism provides automatic turn-off operation of the press as a single and continuous strokes.
Regulation mistango space is carried out by hand.
The press drive from an individual electric motor through V-belt transmission; a clutch turn — with a turning key.
Brake — band, periodic action.
Lubricant press — individual.
The pressure at the end of the stroke, t: 10.
Stroke of slide, mm: 65.
The number of strokes of the slider per minute: 120.
Regulation of length of connecting rod, mm: 55.
Distance between table and slider in its lower position with the smallest length of connecting rod, mm: 180.
The distance from the axis of the RAM to the frame, mm: 160.
Table dimensions, mm:
front to back: 270;
right to left: 400.
The diameter of the hole in the table, mm: 176.
The size of the RAM, mm:
front to back: 106.
right to left: 120.
The size of the hole in the slide for the attachment of a stamp, mm:
diameter: 40;
depth: 60.
The greatest angle of inclination of the bed to 30°.
The three-phase AC motor:
type: AD No. 31/6.
Power, kW: 1,2.
the number of rpm: 1000.
Dimensions of press, mm:
the plan: 930x760; n
ibalsa height above floor level: 2090.
Press weight (without motor) kg: about 690. Good condition.Connected, tested. Location: Kiev. More information at: http://marketstan.all.biz http://marketstan.com.ua http://marketstan.com
