IZH 95ТС-1 (IS1-1) screw-cutting lathe universal high precision

Lathe machine 95ТС-1 increased accuracy made on the basis of the machine 1И611П. Designed to perform the various works in the centers, collet or Cam-driven cartridges for black and nonferrous metals, including turning cones, and also for cutting of metric, modular and inch threads. Machine used for finishing and semifinishing works in single and small batch production. The machines are designed for operating mainly in multi-storey buildings, as well as in mobile repair shops and courts. Class precision GOST 8-82: P. the Largest diameter turning diameter over bed, mm: 250. The greatest workpiece diameter over carriage, mm: 125. Maximum workpiece length (RMC), mm: 500. Height of centers over flat the guides of the frame, mm: 130. Diameter the through hole in the spindle, mm: 25. The greatest diameter of the rod passing through the hole in the spindle, mm: 24. The number speed straight frequency of rotation of spindle: 21. The frequency of direct rotation spindle rpm: 20..2000. The number of stages frequency reverse rotation of spindle: 21. The size of the inner cone spindle: Morse 4. The end of spindle according to GOST 12593-72: 4. The greatest stroke length carriage (maximum lengthwise shift caliper) mm: 500. The greatest transverse slide travel, mm: 180. The price of division limb longitudinal travel, mm: 0,1. The price of division of the limb cross travel, mm: 0,02. Limits longitudinal working feed, mm/Rev: 0,01..1,8. Limits of working feeds transverse, mm/Rev: 0,005..0,9. Limits of steps of cut threads metric, mm: 0,2..48. Limits steps cut inch threads: 24..0,5. Limits steps cut into modular threads: 0,2..30. The maximum length of travel turning tool slide, mm: 120. Moving cutting sled, for one division of the limb, mm: 0,05. The greatest angle of rotation of the cutting sled, deg: ±80°. The height from the reference the surface of the cutter to the center line (height cutter), mm: 16. The number of cutters in the tool head: 4. The taper hole of tailstock tailstock according to GOST 2847-67: Morse 3. The greatest displacement of tailstock, mm: 85. The movement of the quill in one division limb, mm: 0,05. The movement of the quill on one line of mm: 1. The value of cross displacement hull grandmother, mm: ±10. The number the motors on the machine: 3. The motor of the main drive kW: 3. The pump motor lubrication kW: 0,08. The pump motor cooling kW: 0.05. Cooling pump (pump): PA-22. Machine dimensions (length width height) mm: 1770_970_1300. Weight of machine, kg: 1120. Good condition. In stock 2pcs. Price 70T 80T UAH and UAH. Connected. Detailed photos on request. Location: Kiev. More information at: http://marketstan.com http://marketstan.all.biz http://marketstan.com.ua