Discove unit isorni DAR-4.0
Offer type: salePublished: 24.04.2019
| Price: | 162 000 UAH |
| Company: | 0988418758@ukr.net |
| Seller: |  Agroblic Katya |
| Phones: |  0988418758 Show phone |
| Address: | Ukraine, Kyiv Oblast', Bila Tserkva |
Perform basic resource-saving processing of soil to a depth of 5 to 18 cm, Provide uniform distribution throughout the depth obrabatyvaemogo soil organic fertilizers and crop residues, creating an optimum structure for plant growth, increase the absorption of moisture by reducing soil erosion, crushed lumps and prikatyvajut the top layer of soil to maintain moisture and smooth the terrain field.
Mounted units provide high performance in small fields.
Units are used at a minimum, conservacao and conventional tillage.
Units of this design combines the functions of a plow, disc harrow, cultivator and cultivator.
Drives installed under certain eksperimentalno angles of attack and setting the rotation axis to the horizontal, which provides the undercut of the lower layer of the soil layer and this reduces the energy intensity of tillage and the wear of the discs provides their samazinasana and the uniform depth of processing.
The discs are fixed on With such springs and make low-frequency oscillations in three planes, with the result that self-cleaned from plant residues and soil, well deepened into the soil and reduces the friction discs. Protect drives and bearings under shock loads.
The discs are rotary motion and this reduces their friction on the ground which provides fuel economy and minimum wear of the discs in comparison with traditional technologies of soil processing.
Disks have cutouts and are manufactured with an inner shank around the outer perimeter, making effective work units for processing heavy and hard soils, including clayey black soils, chopping crop residues and reduces traction of the tractor.
A significant angle of attack and setting the rotation axis to the horizontal contributes to the rise to the top of the soil and plant residues and their good mixing.
In the bearing Assembly use the high quality bearings in Lutsk bearing plant, which is a Corporation, SKF and modern cassette seal and high-quality grease that provides life-bearing units 9,600 acres in the aggregate a GIFT of 2.4. Dismantling of worn-out and installation of new drives is performed without disassembly of the bearing unit.
Drives are used for large diameter (660mm) and is less on the meter than the capture discs of smaller diameter and it gives you the opportunity to make the unit less materially, decreases the number of bearing assemblies (14 vs 20 (D=560 mm) with a width of 2.5 m ), the energy intensity of tillage and saves fuel.
Reduced spacing of the disks and their optimal settings for their setup provides qualitative soil tillage with smooth bed allowed more wear before replacement than its competitors and provides a high resource of disks and aggregates.
The units attach to your tractor on standard three-point hitch system.
The depth of cut is set by adjusting the packer and a tractor mounted system.
To ensure aggregation with tractors of all firms without assuming the unit to attach the Central thrust, there are two openings with different diameters.
Only adjustable cultivation depth, and other parameters before installing the disks, they overlap, and others determined experimentally and the optimum set of design units that reduces the time for adjustment and provides qualitative soil tillage with minimum energy consumption. The Assembly is designed so that the mechanic was processing the soil and not experimented on regulation.
Mounted units provide high performance in small fields.
Units are used at a minimum, conservacao and conventional tillage.
Units of this design combines the functions of a plow, disc harrow, cultivator and cultivator.
Drives installed under certain eksperimentalno angles of attack and setting the rotation axis to the horizontal, which provides the undercut of the lower layer of the soil layer and this reduces the energy intensity of tillage and the wear of the discs provides their samazinasana and the uniform depth of processing.
The discs are fixed on With such springs and make low-frequency oscillations in three planes, with the result that self-cleaned from plant residues and soil, well deepened into the soil and reduces the friction discs. Protect drives and bearings under shock loads.
The discs are rotary motion and this reduces their friction on the ground which provides fuel economy and minimum wear of the discs in comparison with traditional technologies of soil processing.
Disks have cutouts and are manufactured with an inner shank around the outer perimeter, making effective work units for processing heavy and hard soils, including clayey black soils, chopping crop residues and reduces traction of the tractor.
A significant angle of attack and setting the rotation axis to the horizontal contributes to the rise to the top of the soil and plant residues and their good mixing.
In the bearing Assembly use the high quality bearings in Lutsk bearing plant, which is a Corporation, SKF and modern cassette seal and high-quality grease that provides life-bearing units 9,600 acres in the aggregate a GIFT of 2.4. Dismantling of worn-out and installation of new drives is performed without disassembly of the bearing unit.
Drives are used for large diameter (660mm) and is less on the meter than the capture discs of smaller diameter and it gives you the opportunity to make the unit less materially, decreases the number of bearing assemblies (14 vs 20 (D=560 mm) with a width of 2.5 m ), the energy intensity of tillage and saves fuel.
Reduced spacing of the disks and their optimal settings for their setup provides qualitative soil tillage with smooth bed allowed more wear before replacement than its competitors and provides a high resource of disks and aggregates.
The units attach to your tractor on standard three-point hitch system.
The depth of cut is set by adjusting the packer and a tractor mounted system.
To ensure aggregation with tractors of all firms without assuming the unit to attach the Central thrust, there are two openings with different diameters.
Only adjustable cultivation depth, and other parameters before installing the disks, they overlap, and others determined experimentally and the optimum set of design units that reduces the time for adjustment and provides qualitative soil tillage with minimum energy consumption. The Assembly is designed so that the mechanic was processing the soil and not experimented on regulation.
