Machine 11Т16А

Specifications:
The machines 11т16а intended for processing by the method of longitudinal turning of parts such as bodies of rotation from calibrated cold-drawn bar in terms of mass, mass, mass production

Accuracy class according to GOST 8—82E. And
The largest diameter of the installed rod, 16 mm.
The maximum length of the bar feeder.
disc Cam 80
with a bell-Cam 140
Limits of spindle rotation frequencies, Rev/min. 450-6300
Number of spindle rotation frequencies 24
The range of frequencies of rotation of the camshaft, rpm 0,05—32,0
The number of frequencies of rotation of the camshaft to the same frequency of rotation of the spindle 29-38
The frequency of rotation of the camshaft at high speed, Rev/min 10*
Time limits to manufacture the part, pp. 1,87—1200
Maximum torque on spindle, Nm. 27,5
The largest cross section of the cutter, 12X12 mm.
The cone diameter collet, mm. 28h11
The cone angle of the collet, grad. 30+10
Distance from spindle nose to the plane of the incisors.
most 220
least 1
The lowest balance of the rod when working.
with non-rotating bezel 105
no rest 25
Maximum dimensions of processed bar, mm.:
diameter 16
length 2000 (3000 optional)
The distance from the bottom of the base of the machine to the axis of the spindle, mm, not more than 1120
Overall dimensions of machine, mm:
length without the support tube 1945
the length of the support pipe of 2200 mm. 3675
width 945
height 1520
Weight of machine with electrical equipment, kg, not more than 1200
Weight of machine with electrical equipment and lubrication system, kg, not more than 1265