6Р83Г machine knee-type milling horizontal

Horizontal knee-type milling machine 6Р82Г designed for milling all kinds of details from steel, cast iron and non-ferrous metals cylindrical, disk, shaped, corner, end, end and other cutters in the conditions of individual and serial production. The ability to customize a machine on various semi-automatic and automatic cycles successfully allows you to use tools to perform work operating nature in production and automated lines in mass production.

The machine can handle the vertical and horizontal planes, grooves, angles, frames, gears, etc

The technological capabilities of the machine can be extended by use of dividing heads, rotary round table, invoice universal head and other devices.

The main parameters of the horizontal knee-type milling machine 6р83:

The largest size of workpiece: 1000 x 320 x 350mm
Motor power: 11 kW
Weight of machine: 2700 kg
Spindle milling machine 6р83 gets 19 degrees of rotation from the gearbox that provides free choice of speeds within the range from 31.5 to 1600 Rev/min.

The end of the spindle - Morse taper КМ50 (Ø128,570 mm) version 6 - GOST 24644 (the ends of the spindles and tool shanks drilling, boring and milling machines). The tool or mandrel inserted into the spindle, tighten the cleaning rod. The pointed end of the rod closes the hood.

Gearbox delivers 18-speed desktop feed in longitudinal and cross direction 25 to 1250 mm/Rev and in the vertical range and 8,3...416,6 mm/Rev. Feed box of the machine 6р83 provides, also, quick movement of the table at a speed of 3 m/min in the longitudinal and transverse direction and 1 m/min.

Using Cams that are installed in the slots table to configure the machine to work in automatic cycle, which can significantly increase the productivity of the machine in serial production.

To maintain the machine 6р83 in perfect working order requires regulation of multiple nodes require special attention: