Column measuring a set of loads to the pressure gauge MP-600
Offer type: salePublished: 01.05.2019
| Price: | 11 000 UAH |
| Company: | Lispriborservis |
| Seller: |  Ivan Valer'evich |
| Phones: |  +380689883427 Show phone |
| Address: | Ukraine, Luhans'ka Oblast', Syevyerodonets'k |
Deadweight gauges MP-600 is widely used for benchmark results in the field of heat engineering. With their help you can easily find a high pressure liquid or gas.
The basis of robots instrument MP-600 is the principle of "non-compacted piston" - the total weight of the piston, the load-receiving device, and installed on the balances of goods measured by the pressure acting on the lower end of the piston.
Scope MP-600: standard for verification and calibration of measuring the excess pressure transducers, model and technical gauges and other measuring instruments, deadweight testers as well lower accuracy class in the laboratory.
Specifications:
The upper limit of measurement (playback) - 60 MPa (600 kgf/cm2).
The lower limit of measurement (playback) - 0.2 MPa (2 kgf/cm2).
The piston stroke of at least 10 mm.
The nominal area of the piston is 0.05 cm2.
Maximum deviation from the nominal value of the reduced area of the piston - 1%.
The nominal value of the mass of the piston with a load device is not more than 0,4x0,98 kg.
Working fluid - transformer oil.
The volume of the working fluid is not more than 250 cm3.
Conditions of operation of the deadweight gauge MP-600:
Ambient temperature - 15 º C to 30 º C.
Relative humidity - 60±20%.
Atmospheric pressure - from 84 kPa to 106.7 kPa.
The average MTBF of 40000 h.
Average life is 8 years.
The manufacturer provides a guarantee the compliance of our dead weight pressure gauge MP-600 all the technical requirements if the consumer terms and conditions of use, storage and transportation, installed documentation manuals.
Available - 1комплект
