Stationary hardness of metals Rockwell UCB TC-R

Stationary metal hardness tester Rockwell UCB TC-R

Stationary hardness Rockwell TC-R is designed for measuring hardness of metals and alloys in laboratory conditions. Stationary hardness tester is used for manufacturing workers measures the hardness of portable hardness testers. The presence of stationary hardness tester allows you to measure the hardness of all metals in laboratory conditions, and then using this sample with a known hardness to calibrate portable hardness tester.

Stationary hardness tester TC-R is a laboratory mechanical device is easy to use and maintain, and most importantly reliable tool.

Stationary hardness Rockwell implements the classical method of measuring the hardness of metals on the basis of the analysis of the resistance of metal to indentation test indenter. Hardness for Industrial TC-R allows to carry out tests using three standard test loads (60, 100 and 150 kg).

Hardness of the CU-P can be used to measure the hardness of various steels and alloys, hard steels, cast iron. The hardness tester can be used for measuring the hardness of both tempered and untempered steel.




Hardness of the CU-P is a stationary device type on a rigid frame. The Rockwell hardness tester can measure metals in three main scales HRA, HRB and HRC with the possible loads, respectively, 60, 100 and 150 kgf. To determine the hardness uses a diamond tip in the form of a cone with angle of 120 degrees at the top, and a ball the size of 1/16 inch (1,5875 mm).

For convenience of measurement of the hardness tester HR-150A is equipped with tables used for different types of target objects. The complete set includes large and small flat tables and V-shaped anvil. In addition, together with the hardness tester TC-R supplied three measures Rockwell hardness, used for calibration of the device.

The Rockwell hardness tester TC-R is characterized by high accuracy of measurements. Its mechanical design and ergonomic design provide ease of operation and low cost of maintenance of the device.
The range of measurements of the hardness tester TC-R can vary from 20 HR to 100 HR (depending on scale). Design features of the device allow you to explore objects with dimensions up to 17 cm vertically and 13.5 cm horizontally.
When production of this model of Rockwell hardness tester uses only high quality materials that ensures reliable operation of the product.