Stamp Eriksen UCB SHENG-1

Description:
The device stamp Eriksen to determine the elasticity and strength of the coatings when the Cup-shaped bend (hood cover Eriksen) according to GOST 29309 and ISO 1520.
The device Eriksen is designed to determine the strength of the cover at the indentation of the spherical tip of the punch diameter and 20 mm in the coated sample, the position of which is fixed on the matrix with an internal diameter of 27 mm

The method of determining the strength of coatings on Eriksen is efficient and comprehensive method of determining the quality of the coating, as at the same time allows us to estimate the strength, adhesion, elasticity of the coating.
The device allows you to accurately measure the strength of the coating product during subsequent operation are static and dynamic loads.

Purpose:
Measurement of elasticity, strength and resistance QTL to stretching, cracking, peeling from the metal surface by the method of pressing to a certain depth of punch with a spherical tip.


Specifications:
The diameter of the spherical tip of the punch 20 mm, an Inner diameter of the matrix 27 mm
The measurement range is from 0 to 15 mm
The limit of permissible absolute error of 0.1 mm


Design:
The device is composed of a steel frame consisting of two bonded frames, a rotary clamping device for fixing the samples with coating or metal samples, the reader of the depth of indentation of punches with vertical and circular scales. The device is simple to use device, not trebuet settings and adjustments.


Package contents:
The device with the passport in the package.