Intermediate relays series PE, RAP

Series relay intermediate electromagnetic PE-40 PE ... -43 Electromagnetic relay intermediate series PE-40, p-41, p-42, p-43 are intended for use in circuit protection, control and automation of electrical power equipment for switching electrical loads in the DC voltage from 24 to 220 V and AC voltage from 24 to 380 V, frequency 50 and 60 Hz. Relays are manufactured in performances U3 and T3. Conditions: Operating temperature range from minus 40 to plus 55 º C; The impact of vibration in the frequency range: up to 15 Hz with an acceleration of 3 g, from 15 to 100 Hz with an acceleration of 1 g. Specifications: Relay intermediate AC or DC: PE-40 - activation time is not more than 0,03; Relay intermediate DC: PE-41 - activation time is not more 0,011; PE-42 - activation time is not more than 0,03 with restraint windings voltage or current; PE-43 - activation time is not more 0,011 with restraint windings voltage or current Details see: http://relsis.ua/relsis/tree/Products/rele_promezhutochnye_i_ukazatelnye/tehnicheskoe_opisanie_pe-40pe-43.htm Series relay intermediate electromagnetic PE-44, p-45, PE-46 Electromagnetic relay intermediate designed for switching electrical loads in circuit protection, control and automation of electrical power equipment. PE-44 - slow when turned on; PE-45 - slow when disconnected; PE-46 - dip. Rated voltage (current) In (A): - DC 24; 48; 110; 220 (0,5; 1; 2; 4; 8); - 220 AC only for PE-45 PE-46. The relay contacts commute currents from 0.01 to 5 And at a voltage of from 24 to 220 VDC and 24 to 380 VAC, thus turning off the AC power is not more than 500 VA (cosφ ≥ 0,5 post. current - not more than 60 W ( t ≤ 0.02 s); Switching endurance: - PE-44, -45: 50 000 cycles; - PE-46: 100 000 cycles. Mechanical endurance: - PE-44, -45: 100 000 cycles; - PE-46: 500 000 cycles. Connection of conductors: - front and rear screws. Details see: http://relsis.ua/relsis/tree/Products/rele_promezhutochnye_i_ukazatelnye/tehnicheskoe_opisanie_pe-44pe-46.htm Relay intermediate dip PE-46A Relays dip PEA designed for switching electrical loads in circuit protection, control and automation of power and industrial equipment. Relays are designed to operate indoors in areas with temperate and cold climates, where the temperature is in the range from minus 400C to plus C and relative humidity not more than 98% at temperature +S (climate performance U3). Place of installation the relays should be protected from exposure to precipitation and solar radiation. Details see: http://relsis.ua/relsis/tree/Products/rele_promezhutochnye_i_ukazatelnye/tehnicheskoe_opisanie_pe-46a.htm Electromagnetic relay intermediate series RAP-20 Relay series RAP are designed for use in control circuits AC drives voltage up to 440 V, frequency 50 and 60 Hz, DC voltage up to 220 C. Depending on the type of the contact group, the method for attaching external conductors, operation indicator, type of current, nominal voltage relays are available in various designs. Relays are manufactured in climatic design O4. Relay suitable for use in areas relevant requirements of category - U3, T3 and NF4. Conditions: ambient temperature from minus 50 to plus 55 º C; relative humidity is not more than 98% at 35 º C; vibration in the frequency range of 0.5 to 100 Hz at 1g acceleration, in the range of 5 to 15 Hz with acceleration of 3g. The relay is mounted on the courts, supervised Case should work: 1) in vibration with a frequency of 2-80 Hz: 2-13,2 Hz with an amplitude of movement 61 mm, 13,2-80 Hz with an acceleration of ±0.7 g; 2) when shocks with acceleration ±5 g and a frequency of from 40 to 80 beats per minute; 3) when the long roll of the vessel up to 15º and trim up to 5º, as well as with side rolling to 22.5 ° with a period of 7-9 with and pitching motion of up to 10 ° from the vertical; 4) In the conditions of relative humidity /75±3/% temperature /+45±2/C, or /80±5/% temperature /+40±2/C, or /95±3/% temperature /+25±2/C. Details see: http://relsis.ua/relsis/tree/Products/rele_promezhutochnye_i_ukazatelnye/tehnicheskoe_opisanie_rep-20.htm