Construction mesh

Mesh masonry is made in the form of maps of various widths and lengths. Depending on the destination, their sizes can be: 0,h,0m, 0,h,0m, 0,5x2,0m, 1,h,m Masonry, it is also the anchor mesh or nets, is a very popular form of welded mesh. We get it by spot welding the intersections of the wire located in mutually perpendicular direction. Made mesh plaster as well as masonry, low-carbon cold-drawn wire VR-1, a diameter of from 3.0 to 6.0 mm, periodic profile (GOST 6727-80). Such a profile provides a large coefficient of friction. In other words, it is the ideal building material for reinforcement couplers, wall masonry and concrete structures. Cell grids in the main square: 50x50, 100x100, 150x150, 200x200, but we can also offer rectangular: h, 150x200, etc. For reinforcement wall brickwork is most commonly used mesh of cells 50-50 mm, in this case, the width of the map depends on the thickness of the masonry and reinforcement couplers using a grid with cells from 100mm. Used nets in the following cases: for reinforced concrete products; for reinforced brick masonry walls on each 4-5 m layer of bricks to increase the bearing capacity of the walls; for blind areas of the buildings and the cap in order to increase their strength; when reinforcing "warm" floors and cement-sand screed floor; when plastering the walls of dissimilar materials (brick-foam block, and so on); when reinforcing surfaces for paving and ceramic tile; in the construction of floors of buildings; for the reinforcement of roadways, sidewalks and driveways walkways to buildings; for making hedges (you can weld the frame of the grid and fill it with stone, and then to plaster); in the manufacture of frames for greenhouses and hothouses. We offer mesh construction of its own production, used for fastening brick and cinder block masonry, screed floors, reinforced concrete, plaster works. Mesh made from wire VR-1, d=3mm;4mm;m We can manufacture and supply of grid masonry under the orders of individual cell sizes and cards No. Ø mm cell Size, mm card Size, m 1 3 50x50 0,h 2 3 60x60 1x2 3 3 100x100 1x2 4 3 h 1x2 5 4 50x50 0,h 6 4 60x60 1x2 7 4 100x100 1x2 8 4 h 1x2 9 5 100x100 1x2 10 5 h 1x2