Pumping hydraulic station, electric CIS-E stock

A great solution for work in the shop, and during field work. Has two modes of operation: Nagnetanie - Reset pressure. Now no need to re-squeezing the tire.

Pumping hydraulic station, electric CIS-E STOCK

Unique oil station! A great solution for work in the shop, so and during field work. Has two modes of operation: Nagnetanie - Reset pressure. Now no need to re-squeezing the tire or guess departure rod. Enough to let go of the pedal and the pressure is fixed, when necessary, you can continue. The pump develops 630 bar has high-speed operation. The split sleeve 3 m makes it comfortable to work presses on the level up to 2 m long for outdoor placement. When necessary, you can also order the sleeves up to 10 m.

Trim
Station with electric motor and oil tank Assembly
12502 high-pressure Hose 3 m with BRS
Remote manual control
The foot pedal control
Repair kit all seals
Passport
Wooden box

Dignity
Two modes of operation
Solid construction
All controls on the front side
Grounded case
Emergency stop button for safety
Retractable handle for comfortable
Removable wheels for stationary installation
Remote control, manual or foot
Vibration-proof pressure gauge
High-speed sampling mode idle
Safety spring exclude fracture sleeves
Long split sleeve included
Suitable for presses with spring return of rod

Features
Maximum pressure: 630 bar (63 MPa, 63 kgf/m2)
Tank: 10 l
Dimensions: mm HH
Weight: 30 kg

Compatible media
02101 PG-300M+ hydraulic Press for crimping cable lugs up to 300 mm2
02003 PG-300+ hydraulic Press for crimping cable lugs up to 300 mm2
02004 PG-60+ hydraulic Press for punching sheet metal up to 3 mm
02002 PG-400+ hydraulic Press for crimping cable lugs up to 400 mm2
02001 PG-630+ hydraulic Press for crimping cable lugs up to 630 mm2 clamps and hardware up to 400 mm2
02006 GSR-95+ hydraulic Press for punching tires up to 10 mm
02007 SR-150+ hydraulic Press for cutting tires to 150h10 mm
02008 WD-150+ hydraulic Press for bending busbars to 150h10 mm